New Datejust from Clean

Now in super clones field of Rolex, the two giants are Clean and VS, the watches coming from Clean almost cover each series of Rolex, while VS also makes replicas of a lot of Rolex watches, but not including the Daytona. I hope VS factory can make Daytona in 2024, because I want to see what improvements can still be made on the Daytona.

The absolute advantage of Clean is its Daytona, BT still can not compete with them. The absolute advantage of VS lies in its Dandong 3235 movement, this is the key factor why VS still can compete with Clean in the Rolex replica field. Because of the Dandong 3235, many people have a buying misunderstanding, which is the watch is the best as long as it uses a Dandong 3235 movement, the Datejust is an example, but Clean also makes super clones of Datejust, I think both have the same quality level. Now the only problem is that ordering a Datejust from both factories will take a long time. Clean and VS have published a lot Datejust replica watches, but both factories only keep several popular models in stock. The following pictures show some new Datejust watches that were just published by Clean, but if you want to order anyone of them, I am afraid you need to wait for several weeks.

These new models are in two tone style, there are yellow gold and rose gold, the bracelet also has Oyster and Jubilee options, among them, I like the two with mother-of-pearl diamond dial and the one with light pink dial. They are perfect new year gifts for women who love big watches.

There are indeed differences you can see on the Datejust watches between VS and Clean, but I can not tell you which factory is the best because I have not seen genuine watches. However, for a specific model like black, blue or silver one, perhaps one factory does better in some details than the other factory, you need to ask advice from your dealer, but VS Datejust has a longer power reserve, which is about 60 hours, while on Clean Datejust, the power reserve is only about 40 hours.

Clean New Datejust
Clean Datejust Pink
Clean Datejust MOP

The Bromance Between APS and ZF

Just in this week, ZF released the replicas of Royal Oak 15450, which have a 37mm case diameter and are measured to be 9.8mm in thickness. They are equipped with the super clone 3120 movement developed by APS factory. There are three colors available, gray, white and blue, please check the pictures of them in the end of this article. Actually I have introduced the replica AP Royal Oak 15450 watches on my blog, they were firstly published by APS factory just two weeks ago, now ZF followed the step of APS and published the same watches. If you ask me which factory makes the best, I would say it is a correct choice no matter which factory you buy from. ZF had cooperation with APS before, but from now on, I am more convinced of their bromance.

Like ZF, APS also has been in this industry for many years, but it is still younger than ZF. When APS just entered this industry, ZF has been famous for some time because of some Panerai replica watches they made, for example, the PAM 127, this is a very hot replica Panerai watch in the past, ZF made it really good and competed with Noob. In 2016, APS seized an opportunity and cooperated with YL factory, both developed an important movement together, which is the clone 51011 that was later used in the replica IWC Portuguese 7 Days Power Reserve watches made by ZF. So, we know that the famous watch Portuguese 7 Days Power Reserve from ZF is actually using the movement given by APS factory. Even YL also published the replicas of Portuguese 7 Days Power Reserve, but they still could not compete with ZF at that time, some people said that ZF has better finish on the case and dial on this replica watch.

Why did APS give movement 51011 to ZF? I guess they need the protection of ZF, because APS just entered this industry and ZF has a strong background. Do you still remember the raid ? I do not know exactly whether it happened two or three years ago, many big factories were closed, including Noob and ARF, but ZF and APS survived.

Next, it is about the super clone AP 3120 movement, which is also developed by APS factory. In the past, ZF used a Miyota 9015 movement in the Royal Oak 15400, on the basis of Miyota 9015, ZF added extra plates and made decorations to let final movement look closer to genuine AP 3120. Several years later, APS spent money and developed a super clone AP 3120 movement, as far as I know, this movement was manufactured by Shanghai xx xx. Because of this movement, the case thickness of replica Royal Oak 15400 and 15500 is much thinner and closer to that of genuines. By the way, APS also gave this movement to ZF, that’s also a big reason why 15400 and 15500 from ZF are being sold so well. Seeing from this thing, the friendship between ZF and APS is really solid. APS factory has also published the replicas of 15400 and 15500, they continuously improve them, but their watches are still not sold as well as ZF.

APS acted faster than ZF but they are always thinking of the latter.

Replica Audemars Piguet 15450 White
Replica Audemars Piguet 15450 Gray
Replica Audemars Piguet 15450 Blue
Replica Audemars Piguet 15450 Crown
Replica Audemars Piguet 15450 Movement

Z Factory Replica Rolex Daytona 126500 with Shanghai 4130 Movement

Just several weeks ago, Z factory announced the release of the Daytona replica watches, are you familiar with them? The black one and white one, look like Daytona 116500, but the ones Z factory published this time are the replicas of the latest Daytona 126500 that were made by Rolex in 2023. The 126500 Daytona has some changes upon the previous 116500, but the replicas from Z factory are not good, I do not recommend.

Its quality is ok, but there are too many differences when you compare it with the genuine watch, and the differences are too obvious, I think it has a solid quality, 904L stainless steel, sapphire crystal and Shanghai 4130 movement, all these elements make it a high quality replica, but not a super clone in my opinion, no people will buy the 126500 from Z factory, especially at this moment when all people are seeking for perfection.

I just did some searches on the pictures of genuine Daytona 126500 and found the replica is greatly different from the genuine, first, its case shape is not correct on the replica, especially on the lugs, second, the most obvious flaw you can immediately noticed is its three subdials, which should be thinner and smaller, but Z factory uses the subdials that are in the same size as the 116500, that’s a big mistake, even the hour markers are thinner, but the subdial on the replica 126500 is a very obvious flaw. I do not think people will buy this watch.

Why did Z factory unveil this new Daytona 126500 so urgently? Because they want to make more money. We know Z factory makes some good quality replicas, such as IWC Portuguese, Audemars Piguet Royal Oak 15400 and 15500, Patek Philippe Nautilus and Aquanaut, etc., they make a lot of models, but today only several watches can earn money for Z factory, they are AP 15400, 15500 and Patek Philippe Nautilus 5711, while among these watches, Z factory is facing the direct competition from APS and 3K factory, so I think they earn much less money than before. So, Z factory need to open another project, actually they have such a plan several years ago, from the release of the replica Rolex Submariner, we can tell that Z factory wanted to enter into the Rolex field, then Z factory published the Daytona replicas, we can see they are very eager to make a success in Rolex field, but they failed. Nobody wants to buy Submariner and Daytona from Z factory in the past, and the latest 126500 replicas published by them this time are also bad clones.

Absolutely there will be super clones of 126500 Daytona in future, I think Clean or BT will release half a year later.

The pictures of the ZF 126500.

Replica Rolex Daytona 126500
Replica Rolex Daytona 126500 Panda
Replica Rolex Daytona 126500 White
ZF Replica Rolex Daytona 126500
Rolex Daytona 126500 Case
Rolex Daytona 126500 Crown
Rolex Daytona 126500 Case Back
Rolex Daytona 126500 Clasp

The pictures comparison between Clean Daytona 116500 and ZF Daytona 126500.

Clean Daytona 116500 vs ZF Daytona 126500

The New Trend – Replica Watches with Increased Weight

All news are about replica watches with increased weight in recent days, actually it is the hottest topic people have been talking about since the second half of this year. Nowadays, replica watches are made closer and closer to genuine watches, but people are still pursuing perfection, so some persons in the market will do custom-made jobs on these replica watches made by famous factories like Clean, ZF and VS, I think they are the first to use the case with increased weight on replica watches, and then the factories found this business opportunity and also participated in. The two factories that firstly make replica watches with increased weight are GM and GS, which published the Day-Date replicas with increased weight, in my memory, they were very popular once being published to our market.

Then another factory appeared, its name is TED, they make a YachtMaster 226659 replica with increased weight, it is said TED is a sub-branch of VS company, but I think it is just a small studio opened by somebody that has a good relationship with VS, so he can sell this watch in the name of VS.

Now the factories we discuss the most is Gold and APS, Gold factory makes replicas of Daytona and YachtMaster with increased weight, APS makes replicas of Daytona and Royal Oak 15400 with increased weight, Gold seems to be more popular. There are some rumors about Gold factory in our market, someone said that Gold is operated by Clean, most people said that Gold is a watch part factory that makes cases and has been in the market for years, I choose to believe the latter one. Now Gold factory only makes the Daytona and YachtMaster models with rubber band. Today, I choose the Daytona with gray dial and rubber band from Gold and APS to take some pictures and make a simple comparison between them.

Both Gold and APS use tungsten steel in the case, but not all pure tungsten steel, the case is made with tungsten steel alloy material, or it is too hard. The weight of the APS Daytona is 145.2 grams, while Gold is 142.9 grams, this Daytona from Clean is around 109 grams, so each Daytona from Gold and APS is more than 30 grams heavier than the Daytona from Clean or BT. However, there is still a weight difference because genuine watch is around 160 grams. Because of the added tungsten steel, the case of the Daytona from both factories may not be polished as well as the one of Clean Daytona, this is true, you can check the case back and the lugs, because tungsten steel is harder and is not easily polished as smooth as the stainless steel.

The biggest difference absolutely lies in the movement, Gold Factory uses a Dandong 4130 movement in this Daytona, while APS uses Shanghai 4130, I still prefer the Daytona with Dandong 4130 movement, because this movement has been tested to be very reliable for years, while Shanghai 4130 is still new to us, currently it is only installed by the Daytona replicas made by ZF and APS. Well, this may be the reason why this Gold Daytona is much more expensive than the APS Daytona.

The case shape and size on the two watches are very similar, I assume that they came from the same watch part factory. The gray dial is slightly different in color, I can not say which one is better, but both are not as good as the dial of Clean Daytona. On the clasp, the engravings on the APS Daytona is thicker and deeper, both Gold and APS use 904L stainless steel on the clasp. At last, please check the pictures of the Daytona from both, the one with a dog head icon is from Gold factory, the other with a green sticker is from APS factory.

The pictures of the Daytona from Gold Factory.

Gold Factory Rolex Grey Daytona Replica

The pictures of the Daytona from APS Factory.

APS Factory Replica Rolex Daytona Grey

Comparison pictures between them.

Gold VS APS