May 2019 – Susan Reviews on Replica Watches

New V2 Edition of Replica Omega Seamaster Diver 300m with Rubber Strap

Rolex and Omega are focal point in watch market in recent months. A lot of new models of them have been published from our factories. The application of 904L stainless steel on these new Rolex is a great development in watch industry in recent years. And on the new Omega released in recent months, the big change, like I said, the improvement, lies in the movement inside, correct black balance wheel, correct balance wheel position, etc. Today, I will share three new models of Omega Seamaster Diver 300m made by VS factory, they are the V2 edition. For these three new models, one is with black dial, one has grey dial, one with blue dial. About the band, the watch can also be equipped with leather strap or stainless steel bracelet. Before see their picutres, please check watch specification first.

Movement: Asia Clone 8800 Automatic, Updated with Black Balance Wheel
Case: 316F Stainless Steel, 42mm*13mm
Bezel: Black Ceramic, Uni-Directional Rotating, Platinum Coating on Bezel Markers
Crystal: Sapphire with AR Coating
Dial: Black Ceramic, Wavy Texture, Superlumed Markers and Hands
Bracelet: Rubber with Deployant Clasp
Hack: Yes
Water Resistant: 30m

The new Seamaster Diver 300m is also upon the top five Omega list, it is loved by a lot of watch fans. Why? I think there are three reasons. First, the high popularity of Omega Seamaster, make it the focus once there are new models published from Baselworld. Second, new wavy dial texture looks very unique. Third, the replica watch is made so perfect, more important, it is from VS factory, which was known as famous V6 in the past.

Both bezel and dial use real ceramic material, platinum coating on the bezel markers can prevent fading. The dial uses the same material as genuine watch. Central hour and minute hands are skeletonized on the center, both hands are sword-shaped, which is one of the iconic features of Omega Seamaster. V6 uses genuine Swiss Superlume material on hour markers and hands, check the lume light in dark conditions, it will surprise you.

Rubber band is an ideal choice for such a diver’s watch. It is waterproof, the band still feels comfortable even it gets wet. Besids, rubber strap can better fit different sizes of wrist than any other bands. Do you like one of the three Omega Seamaster Diver watch? There are heavy pictures below.

Replica Omega Seamaster Diver 300m Black

OM Factory Replica Omega Speedmaster Dark Side of the Moon “Black Black” with Clone 9300

OMF Replica Omega Speedmaster Dark Side of the Moon Ceramic

Rolex or Omega? Which one is the first watch that landed on the moon. I think it is the Omega, what do you think? Because the name, Omega Speedmaster, it is also called Moonwatch. Although Speedmaster is not sold as well as the Seamaster of Omega, it also has some popular models, for example, the Dark Side of the Moon. Before the appearance of OM factory, there are only some small factories that were manufacturing the replicas of Omega Speedmaster Dark Side of the Moon, however, there were still a lot of people that have asked me about this watch since I opened this blog. Now, OM factory pushed the sales of replica Omega Dark Side of the Moon to another height. This model is even in the top five list of best-selling replica Omega watches.

Like its name “Black Black”, the Omega Speedmaster Dark Side of the Moon is in full black. The watch is made of black ceramic in case and bezel, 44mm case diameter is large but is exactly in line with our aesthetic standard. Solid ceramic case has brushed finish, it has a great texture and feels very good. Tachymetre scales on black ceramic bezel are in matt black. Two chronograph pushers use different processing, which is polished and contrasting with the brushed case.

Black dial has a micro-sand finish, there are two small dials, like the two eyes of owl. Small second hand is running on the subdial at 9 o’clock. The subdial at 3 o’clock now works the same way as genuine watch, there are two hands on that subdial, the longer hand is displaying minutes chronograph, while the shorter hand is hour-chronograph pointer. The movement has been modified by OM factory, so the minute and hour chronograph could be completely achieved on this replica watch.

Black nylon strap may be the best match for this watch. The texture of the black nylon band is exactly in line with the black matt finish of the watch. On the back side of the band, the side that touches your skin, is made of genuine leather. I tried this type of band on my hand, it maintains the soft wearing comfort of full genuine leather band, but also looks very cool due to its black nylon material on outside.

Replica Bell Ross BR03-94-GR-ST/SCA Horolum Chronograph with Free Nylon Strap

I have not introduced Bell Ross watches for a long time, on my blog, I only give reviews of those watches that have a great amount of sales, and these watches cover brands such as Rolex, Audemars Piguet, Panerai, etc. Bell Ross is not one of these best-selling brands. However, some models from Bell Ross sometimes will raise my attention, this square brand watch has a rich military source that exactly attracted me. Today, I am going to introduce a special Bell Ross replica watch, I do not know which factory makes this watch, as I know, no exact factories are willing to replicate Bell Ross watches with a big amount of quantity, but this is a replica Bell Ross that should catch your attention. The exact model number is BR03-94-GR-ST/SCA, it is a grey model because you see its grey case and grey dial.

The case is 42mm*42mm, it is only 14mm in thickness. The whole case is brushed, whether you check the case from front and sides, it is brushed. To be exactly, the case is micro-sandblasted, including bezel, lugs and chronograph pushers. The case back is also sandblasted, with full engravings. Look at the words “AVIATION TYPE / MILITARY SPEC.”, means the genuine watch meets strict standards of military watches. The whole case is specially treated, so its grey is very close to the grey color of the dial.

It looks like the dial uses a sandwiched structure, the upper grey disc has a micro-sandblasted finish, all hour markers are skeleton, including the big Arabic numbers “12” and “6”. The plate at bottom is fully applied with cyan luminescence, so are the hands. On the big grey dial, the two small dials at 3 and 9 also look very large, small seconds subdial with black “60” is positioned at 3 o’clock, the 30-minute chronograph counter is positioned at 9 o’clock. All hands on the dial are applied with cyan luminescence, the entire dial will have a strong green lume light in dark conditions.

Black leather strap is fitted on the watch, there is big Bell Ross Logo printed on the leather band. Because of the square feature of Bell Ross, the leather strap looks much wider than that of any other brands. By the way, the factory also offers one pair of black nylon straps for the replica watch, free toolkit is also provided.

XF Factory Replica IWC Pilot Bronze Watch with Asia ETA 2824-2 Movement Brown Leather Strap

Several years ago, Panerai published Luminor Submersible 1950 PAM 382, which raised a bronze storm in watch industry. The story between XF and bronze started from Panerai’s PAM 382. Afterwards, XF unveiled PAM 507, PAM 671, Zenith Type 20 Pilot Extra Special, Tudor Black Bay Bronzo, these are all art work of XF that are made of bronze material. So, we can see that XF factory continuously researched bronze and applied this material in their watch-making process, today, they released this IWC Pilot Spitfire bronze watch, it is the first IWC watch that is made of bronze.

Actually, it is not hard to make a bronze case, but the difficulty is that bronze case should be oxidized to our expected result at the speed we want, XF has always been researching this, now the oxidized result on this IWC Pilot Spitfire has achieved a perfect condition, which is closest to genuine, compared with the bronze case from small factories, you will find that their oxidized color is uneven and there is even rusty spot.

Many people love watches made of bronze, because these watches offer them more fun in the wearing process. Bronze case will be oxidized, due to the different environment we are living, so the bronze watch will have different oxidized effect, the bronze case will leave your own special trace.

Why should you buy this IWC Pilot Spitfire bronze watch from XF factory?

The assembly is completed in formal factory by skilled watch masters, the accuracy and stability of every Spitfire bronze watch are guaranteed.
Every piece of IWC bronze Spitfire from XF factory is tested by professional instrument, you do not need to worry about its water resistance.
Appearance and dust quality check. Watches with any tiny flaws will not be published to the public.
The accuracy of every XF IWC Spitfire Bronze watch is tested with swiss standards, which is controled within 15 seconds.
XF adopted Sea-gull 2824, which is considered to be the widely used and most stable movement. Among Sea-Gull 2892, 2836, 2824 and Citizen 9015, after a detailed consideration, XF finally decided to use this Sea-Gull 2824 automatic movement. Genuine watch uses IWC In-House 32110 movement, so whether what movement XF used in this watch, the outlook will not be the same as genuine, so they turn to the most stable one. Because Citizen 9015 has a loudly auto rotor when you wearing the watch, so I think Sea-Gull 2824 is most suitable for this watch.

Here are more details of the watch.

Movement: Nickel Plated Asia ETA 2824-2 Automatic
Case: 39mm*10mm, Solid Bronze
Crystal: Sapphire with Swiss Grade AR Coating
Dial: Green with Swiss Green SuperLume on Markers and Hands
Bracelet: Brown Calf Skin Leather with Bronze Pin Buckle
Water Resistant: 30m