Omega – Susan Reviews on Replica Watches

VS Factory V4 Seamaster 007 No Time to Die

It was about two weeks ago, the latest V4 edition of Seamaster 300m No Time to Die from VS Factory just came out, it is said this is the ultimate version of this replica watch, with the latest super clone 8806 movement just developed by VS. This Seamaster 007 No Time to Die is very popular, just like the Seamaster Spectre, in my memory, VS Factory just made improvements for three times on the replica, the replica watch firstly came out years ago is made of stainless steel, on V2 edition, VS Factory made the case with titanium, on V3 edition, VS updated the bracelet with titanium, and on this V4 edition, the movement is now changed to a super clone 8806. On some dealers webiste, they saying that this replica is V5 or V6, does VS really make improvement four or five times on the replica?

The V3 edition is out of stock. Now in the market, VS Factory has V2 and V4 in stock, V2 has a titanium case and a steel mesh bracelet, V4 is totally titanium made, its weight is about 96.9 grams, which is 4 grams lighter than that of genuine watch.

About the movement, it is indeed a super clone 8806 movement, not based on the Sea-gull 2824 and added with extra plates on top. However, this super clone 8806 movement is not exactly the same as the genuine Omega 8806. The balance wheel is slightly different. After removing the auto rotor and next plate, we can see the movement structure clearly, please check the last movement picture below, if you compare it with genuine Omega 8806, you will find the difference. But this super clone 8806 is already good enough. However, it is not like Dandong 3135 and Dandong 3235 as well as APS 3120 movement, whose components can be interchanged with genuine movements. This super clone 8806 has the same level as the 8500 and P.9000 movement from VS Factory.

Conclusion:

Fortunately this Seamaster No Time to Die has a solid case back, people are not able to notice the difference on the balance wheel. But it is exactly because of its solid case back, I think it is not necessary to spend more money to buy the V4 edition. For most watch fans, the V2 already has a very high quality, its stainless steel bracelet is better finished than the tianium bracelet on V4, besides, the movement in V2 is also very stable even it is modified on basis of a Sea-gull 2824, its stability has been tested for years.

Replica Omega Seamaster No Time to Die V4

VS Factory V3 Replica Omega Seamaster 300m No Time to Die

Correct, we usually call it V3 edition, on some dealers websites, they may call it V5. This replica Omega Seamaster was firstly produced by VS Factory in 2020, now in the beginning of the 2025, they made an important improvement on this replica, which finally manufactured a titanium mesh bracelet out for this watch. The last version, also V2, is equipped with a stainless steel bracelet. Now with the updated titanium bracelet, the entire watch will have a weight of 95 grams, the titanium bracelet weighs about 37 grams separately. Why VS Factory did not use a titanium mesh bracelet on the watch in 2020? Actually it is hard to make a perfect mesh bracelet with titanium material before, and on the V3 edition, I think the finish on the titanium bracelet is also not as good as that on previous stainless steel bracelet.

Replica Omega Seamaster No Time to Die Titanium

Replica Omega Seamaster No Time to Die V3

Omega Seamaster No Time to Die Black Dial

Omega Seamaster No Time to Die Case Back

Omega Seamaster No Time to Die Titanium Bracelet

VS factory is in danger

Now I am just kidding, hope this danger never find them, however, VS factory has published a lot of new replica watches in the past months, while their competitor Clean is relatively quiet, so it is easy to be targeted again since the last raid that happened in last month. We hope VS can offer us the best clones in future and become the legend in this industry.

Today, I want to introduce four new replicas just released by VS factory. Three of them are Omega Planet Ocean 600m watches, and one is a Panerai PAM 1391. Four replicas are all super clones. The three Omega are different from each other in dial color and bezel color, there are grey, green and khaki color options, I like the green one, it seems like the green one is a great summer color. Three Omega have a blasted ceramic bezel insert and rubber band, they are equipped with 8900 movement, which is one of the most famous and most stable super clones movements coming from VS factory, much better than the movement used in the replicas of their Omega Seamaster 300m.

The new Panerai PAM 1391 is a special edition, made for Luna Rossa Team, it belongs to Panerai’s Submersible collection, not too many things worth being talked about this replica, quality is always as good as other Panerai watches from VS, it is a special edition and has some unique features, if you do care the Luna Rossa name and the color of the band, there are also many other good quality Submersible replicas from VS, they have published a lot in recent two years, especially the ones made with forged carbon material. PAM 1024 is the one I love most.

Replica Omega Planet Ocean 600m Ceramic Grey

Replica Omega Planet Ocean Ceramic Green

Replica Omega Planet Ocean Ceramic Khaki

About VS factory

In the past months, I introduced the stories of some watch makers, including Clean, APS, ZF, OM and 3K, some readers shown the interest and asked me to give an introduction of VS factory, having been in this industry for a lot of years, I know some things but not too much about VS, so today, I will write these things out for you to read.

First, some readers still asked me where to buy Noob watches, I already mentioned on my previous posts that Noob has been closed forever, they won’t come back to the business in future.

About VS, this is really a big factory and has a longer history than any other watch makers in the market including Clean and ZF. VS is actually more famous than ZF and Clean all over the worldwide. Long long ago, someone went to the Zhanxi watch market and found that the replica Panerai PAM 111 and PAM 005 made by Noob were popular, then he decided to make better replica Panerai watches and sell, he believed that the automatic models would be more popular and started to make the first replica PAM 441. In 2015, the Panerai replicas they made are sold under name KW, and the other name V6 they used for selling replicas of Cartier Ballon Bleu. Those Panerai replicas they made at the beginning are using Shanghai 7750 movement with chronograph feature removed, some people said it is Dandong 7750, I do not know. This movement is added with extra plates with similar decoration to genuine P.9000 movement. The release of this movement was a big surprise at that time, and Panerai replicas made by KW became very hot, I think more popular than today.

In the end of 2016, the first generation of super clone P.9000 movement was born, but it did not have an important feature, which is its hour hand could not be independently adjusted. The first generation of super clone P.9000 was a big improvement in fake Panerai field at that time. And they decided to use a new name VS in 2017, so VS was officially born. The first batch of replica Panerai watches with the super clone P.9000 movement, which include PAM 441 and PAM 661, immediately became the best sellers in the market once being introduced. The Cartier Ballon Bleu replicas from V6 were also being sold very well at the same time. They earned a lot of money. Later, they opened another branch named XF to make VC 2000V and AP 15202.

After, VS decided to make Omega Seamaster, the replica Seamaster 300m Omega watches came out first, I do not know which year it was, these Seamaster 300m replicas coming from VS are equipped with Asia clone 2824 automatic movement that was dressed to Omega 8800 calibre. The first batch of Omega Seamaster 300m replicas won a lot of customers immediately because of their super quality and clean assembly, because VS factory has already used fully automated production and assembly at that time. In the same year, the second generation of super clone P.9000 movement came out.

I do not know when Noob factory started to use Dandong 4130 movement in the Daytona, but in the same year, VS factory unveiled a lot of Omega replicas including Seamaster 150m and 600m as well as De Ville that use clone 8500 and clone 8900. From that time, customers who like Omega only bought the replicas from VS, because they have the best super clone 8500 and 8900 movement. About Panerai, all super clone P series movements are coming from VS.

In 2020, VS introduced two important movements, one is Dandong 3135, which is equipped in VS 40mm Submariner, the other is Dandong 3235, which is equipped in VS 41mm Submariner and Datejust. They started to seize the market share of replica Rolex. Later, the second generation of Shanghai 3135 movement used by other factories was born, but it still can not compete with VS 3135, that’s the reason why Clean abandon it and choose to use Dandong 3135.

Next, it is the raid, many factories closed, VS was closed for some time but it finally came back. During the closure period, we witnessed the rapid growth of another actory, which is Clean. If that raid did not happen, I think VS today controls the biggest market share of super clone Rolex. Do you agree? Because of that event, now VS delivers much slower than before. Anyway, you should feel lucky because VS is still in the business.

New-arrival Replica Omega Seamaster 300 Watches from VS Factory

VS factory continues to publish new models, today, we welcome two new Omega replica watches from VS factory, one is a Seamaster 300 75th anniversary summer blue, the other looks very similar to the Seamaster Spectre edition Omega published years ago. Both replicas have a very good quality and are super clones.

Both replicas are made with stainless steel, stainless steel case and bracelet. The case has a diameter of 41mm and is measured to be 13.8mm in thickness, which is the same as genuine watch. The Seamaster 300 Summer Blue has a smooth ceramic bezel, while the black one has a matte finished aluminium bezel.

Both replicas have a sandwiched dial that is covered by a arched sapphire crystal, the dial has a strong lume, which is blue except the green lume on the minute hand. When talking to the lume of the watch, the bezel markers on the black Seamaster 300 are also lumed.

Both replicas have a stainless steel bracelet that is brushed on the middle links and polished on the side links. The bracelet has a deployant clasp that features extension device, which could be opened through the push button.

Both replica watches are equipped with clone 8912 movement, which is very reliable. The decoration of the movement plates and auto rotor is highly close to that of genuine Omega 8912 Calibre. Because genuine watches have no date function, there is a difference in time adjustment, but this won’t affect the high stability of this movement in the replica.

Replica Omega Seamaster 300 Blue Ceramic

VS Factory Replica Omega Seamaster Planet Ocean 600m Titanium Grey Watch

Sometimes it is embarrassing to introduce the new watches of VS factory on my blog, because you usually need to wait a long time before shipping, customers often do not want to wait for so long. Now VS factory does not keep too many watches in their office, and every time they also do not release too many watches to the market, so a lot of distributors here in our market do not want to promote the watches of VS, but for some replica watches, only VS makes the best ones, so you have to wait if you want the best.

Today, I want to introduce a new replica watch from VS, it is an Omega Seamaster Planet Ocean 600m replica watch, VS has published a lot of Omega Seamaster replica watches, but not all of them use super clone movements, the Seamaster Planet Ocean 600m from VS is exactly the one that uses super clone movements like 8500 and 8900.

Omega Planet Ocean Grey Titanium Replica

This new Omega Planet Ocean 600m replica from VS uses titanium material, the other models VS published before are made with stainless steel, this new replica has a much lighter weight, which is 117 grams, while black/orange one with rubber band is about 140 grams. The new titanium Omega replica will be more comfortable to wear. The watch has a big and thick case that is measured to be 43.5mm in diameter and up to 16mm in thickness, so a titanium case will be much better for such a big watch.

The polished Omega logo on the matt finished crown face reflects the high quality finish of the entire case, including the arched lugs in correct shape. The bezel is separated in two parts, the grey part is ceramic made, the orange part is not ceramic, I am not sure what the orange material is, but it is not lacquering, on this replica, the orange coating won’t fade. That’s a difference between VS and other factories who make Planet Ocean 600m Seamaster. The bezel pearl at 12 o’clock is also very close to gen on this replica, VS factory makes this lume pearl correct, not domed, it is a bit sunken.

No need to talk the dial of the watch, VS always does a very good job on the dial. Well, the movement, which can be seen from the crystal back, worth more discussion. It is the only one super clone 8900 movement in the market, other factories such as OM that make replicas of Omega Planet Ocean also has this clone movement, but not like this one from VS, VS independently researched and developed this super clone 8900, which is not based on any Chinese movement, the clone 8900 from other factories is based on a Chinese movement and then being added with an extra plate on the top. The super clone 8900 from VS factory not only has a very close decoration to genuine Omega 8900 Calibre, but it also has a genuine time and date adjustment. By the way, many people bought the replica Omega Planet Ocean 600m watches from VS factory before, no one has complained about the movement.

At last, the replica uses a grey rubber band that also has orange color that exactly in line with the orange color on the bezel. The rubber band looks a little bluish, but it is indeed grey. You can wear this replica watch when washing your hands and swimming in the pool.

VS Factory New Ceramic Seamaster 300

Replica Omega Seamaster 300m Black Ceramic

Today, I want to introduce two new models from VS factory, they are the latest Seamaster 300 watches, both are made with ceramic, one is full black, the other has rose gold bezel and crown. Actually I introducd these two watches before, which were made by OR factory, now this factory has been closed since the March in this year, I do not know when they will be back. In March, there was a raid, GF was closed due to that raiding, someone said OR factory is also owned by GF, so both factories now out of the business, it is a pity. Because GF usually offers us high quality Breitling replica watches, and OR factory is usually the first one to make the replicas of the new Seamaster watches published by Omega, during the closure of VS two or three years ago, a lot of people bought the Seamaster replicas from OR.

Back to the two watches, I like the one in full black, it is full ceramic made, the watch case is measured to be 43.5mm in diameter, and about 14.2mm in thickness. The one in full black has a ceramic case, ceramic bezel, ceramic crown, ceramic case back and ceramic buckle, do you like this style? If you do not like the both watches here, VS also has other Seamaster 300m models, VS has the most complete collection of Seamaster. The hour markers on the dial do not have white lume coating, in dark conditions, there is weak lume light, both can still see blue from the hour markers and green from the bezel marker at 12:00.

Both replicas are equipped with a clone 8806 automatic movement, which is not a super clone 8806. VS just adds extra plates on base of the original Sea–gull movement and makes close decorations that look like that on genuine Omega 8806 Calibre. However, this is the latest clone 8806 movement because VS has made an improvement on its shock absorber.

By the way, original watch does not have date function, but on the replica, the movement still offers a pull-out section for adjusting date, this is a big difference between the genuine and replica, but won’t affect performance.

OR Factory Replica Omega Seamaster 300m Green Ceramic Watch

Actually I do not want to talk about this watch because VS factory does not make it, VS has produced a lot of Seamaster 300m Diver replica watches, but this is the only one they do not have, what a pity. Perhaps the previous closure is a great hit to them, and now VS mainly focuses on the production of super clone Rolex, including Submariner and Datejust.

With the raid of last time, many watch factories were closed and VS is one of them. Now, VS back to the business. Before the raid, Omega Seamaster is one of the flagship products of VS, Omega Seamaster 300m Diver is also one of the best-selling replica watches, no other factories can compete with VS in the sales of replica Omega Seamaster watches. VS factory has not made new Omega Seamaster watches and new Panerai watches for a long time.

This Seamaster in green is from OR, wich is a new factory that appeared at the time when VS was in closing. OR mainly produces Seamaster replicas, in the past I did not think people will buy Seamaster from OR factory, but the Seamaster from OR is selling very well, the quality is high, with a cheaper price than VS, but I think the most important reason is that ordering a Seamaster from VS takes too long. About this green ceramic Seamaster 300m Diver, not too many factories make it, OR is the only one that makes a high end replica of it.

This Seamaster uses green ceramic on bezel insert and dial, it comes with a stainless steel bracelet, absolutely you can change the green rubber band on, usually you buy the one with stainless steel bracelet, OR factory will give you one green rubber band for free. Compared with this green Omega Seamaster, I think people will still want the black one with wavy dial, after all the green is not a regular color choice for a watch.

The green Seamaster Diver watch is made with solid 316L stainless steel, it has a case whose diameter is up to 42mm and thickness is 13mm. The case has a good finish, just like the quality of VS Seamaster, now, all watch factories that produce high end replica watches focus on the finish of case and bracelet, the case must be 1:1 replicated, whether in case profile or size, they are very close to genuine, some factories even claimed that their watches’ case can be interchanged with genuine watch. The green dial also uses ceramic material, hour markers with thin silver frame so there is enough space for luminous coating, the skeleton hour hand and minute hand are also applied with luminous coating, the lume light on the dial can last for hours in dark conditions.

About the movement, it is a clone Omega 8800, which is cloned according to genuine Omega 8800 Calibre, the auto rotor and movement plates have the same decoration as real. I always emphasized that the 8800 from VS factory is the most authentic and best clone 8800 movement in Seamaster, yes, that’s true, VS spent a lot of time and money in cloning the movement of Omega Seamaster, so their clone 8800 looks closest to real, but this one inside the OR factory also looks good, and it makes the case keep a correct thickness.

The Seamaster from OR factory has a good quality, and OR also decreased the prices of their Seamaster when VS announced their back to the market, now you can buy and save money.

A new model from VS factory and important notice

It has been a long time since VS factory has not published new watches, the last one they unveiled is the Submariner 41mm 126610LV in 2021, due to the raid and coronavirus, VS has been closed for many days, now they opened again and accept orders now. This Seamaster 007 is a new model which VS just made, it is also the only one new Omega Seamaster watch VS has published in recent two years, that’s sad to hear, if without situations in the market, I think you guys will find more new replica watches online.

This Omega watch is a limited edition of Seamaster 300m Aston Martin Neiman Marcus, genuine watch only has several pieces limited, for the replica, I do not know if there will be need of this watch, it does not look that cool like Seamaster 007 Spectre and Seamaster No Time to Die, if I am a 007 movie fan, I will choose a 007 limited edition watch between Spectre and No Time to Die.

VS factory offers two band options for the replica watch, stainless steel bracelet and black rubber strap. Usually you can buy the one with stainless steel bracelet and get the black rubber band for free.

The watch is a very high quality one like other Omega Seamaster watches from VS factory. I found one interesting thing, during the closing period of VS factory, some new factories like ORF appeared and offered customers Omega Seamaster replica watches, their quality is ok, but when VS back, ORF decided to sell their Omega Seamaster watches at reduced prices, because they know they can not compete with VS factory in this field.

There is an important notice from VS factory, before letting you know that, I want to share the specification of this Seamaster watch.

Movement: Clone 8807 Automatic, modification made on auto rotor and movement plates to make it look closer to genuine Omega 8807 Calibre
Case Size: 42mm*13.5mm
Case Material: 316F Stainless Steel
Bezel: Titanium, Uni-directional rotating
Crystal: Sapphire with AR Coating
Dial: Grey, Blue Superlume on Hour Markers and Hands
Bracelet: Stainless Steel/Black Rubber
Water Resistant: 30m

Replica Omega Seamaster 007 Aston Martin

At last, the notification from VS factory, it is very important, they will offer the last batch of watches in April 10th and 11th, yes, in this weekend, after that, VS will have a rest and stop accepting orders, it is said that they will have a rest for almost three months. So, if you guys want to order any watch from VS, please be quick to contact your dealer, maybe there is only one day left to place your order with VS.

News

Bofore the new year, I want to announce two great news, one from OR factory, the other is from APS factory. To celebrate the New Year’s Day, OR factory has a promotion for their Omega Seamaster 007 No Time to Die, before January 2, 2022, ordering one Seamaster 007 No Time to Die will get one extra nato band and one leather pack, please see photos below, the price not increased, now you only need to pay for one single watch and can get these accessories for free.

The second news is from APS factory, it is about Audemars Piguet. That is APS is going to publish the Audemars Piguet Royal Oak Offshore Chronograph 44mm, with small seconds @ 12 o’clock, every specification is like the AP from J12 factory, clone 3126 movement, even the price is the same. Perhaps APS factory will replace the role of J12 factory in future.

Omega Seamaster 007 No Time to Die with Leather Pack

Audemars Piguet Royal Oak Offshore Chronograph 44mm APS Factory