The Best PP Aquanaut 5165A Replica Watch From Z Factory

Replica Patek Philippe Aquanaut Black

Nautilus and aquanaut are two best-selling models of Patek Philippe, both also have a high popularity among those sports watches, especially Nautilus, which is considered to be a must-have stainless steel watch. In fake watch industry, there are several full stainless steel watches that are worth buying, Nautilus is one of them. Many factories made Aquanaut and Nautilus in our market, the most famous are two manufacturers, ZF and PF, both of them have made good quality replica watches of 42mm Patek Philippe Aquanaut, in the future, I will write one post to compare the 42mm Aquanaut between ZF and PF, however today, I will introduce the new watch from ZF, it is a new Aquanaut with 38.5mm in case diameter.

Replica Patek Philippe Aquanaut 5165A
ZF Replica Patek Philippe 5165A

Compared the 42mm model, this Aquanaut is much smaller in case diameter, which is only 38.5mm, the case thickness is also only 8.6mm, less than 9mm on 42mm Aquanaut. So, for this Aquanaut 5165A, it is more suitable for people who like a samll size sports watch. The bezel of the Aquanaut looks unique, it more looks like a round, a bit slightly octagonal. About case, it has a high quality finish, compared with the finish on PF Aquanaut, I think ZF’s is better. The entire case is slightly curved, and every corner is smoothly polished without scratch touching, so the wearing comfort is highly guaranteed.

Patek Philippe Aquanaut Stainless Steel Case
Patek Philippe 5165A Crown

The dial is black, the texture on the dial makes Aquanaut unique and famous. The high legibility is another big selling point of the replica watch, besides the big square markers, there are also Arabic numbers, each marker is applied Swiss luminescence, so is hours hand and minutes hands. The white markers and hands are clearly readable not only because of the black background, but also due to the strong green lume light in dark situation.

Patek Philippe Buckle
Patek Philippe Aquanaut Black Rubber Strap

About the movement, ZF uses an imported Japanese Miyota 9015, on its basis, some modification has been made on the auto rotor and movement plates to make it closer to genuine PP324 Calibre, actually ZF made it. The golden SEALs on the movement plate are correct, the jewels are also in right color, this is also the only one clone PP324 movement in our market whose balance wheel is in right position. So, even this is a replica with see-through crystal back, you will not be afraid to show it in front of your friends.

Patek Philippe Clone Movement

In conclusion, this new 38.5mm Aquanaut from Z factory is a replica watch that worth buying, it is exactly the perfect replica you are looking for, although the price is much higher than replicas from small factories.

Patek Philippe ZF Package

Sea-Dweller 126600 Single Red Noob VS ARF

As the two largest manufacturers of replica Rolex watches in the market, Noob and AR have produced a lot of good quality Rolex replicas for us, they are also the two factories that firstly used 904L stainless steel material in the making of replica Rolex, since the usage of this advanced stainless steel material, the competition between Noob and AR is also becoming more and more fierce. In my opinion, the competition between them mainly comes from two products, Daytona and Sea-Dweller Single Red 126600, which are the most popular two Rolex replicas in 2019.

About Daytona, it is undeniable that Noob makes the best replica, however, about this 43mm Sea-Dweller Single Red 126600, I think both have their own advantages. Noob and AR make it with 904L stainless steel, about movement, Noob has Asia 2836 and 3235 options, while AR factory only has Asia 2824 movement option. AR factory unveiled the replica 126600 earlier than Noob, now the version of 126600 from AR is V3.

Case

Both factories make the same case size, which is 43mm in diameter and 14mm thick. However, about the case finish, I think AR factory is better. All clients of mine who bought this 126600 said that the AR 126600 gave them a real feeling when they firstly touched the case and bracelet. Every corner of the case is polished by skilled master, the case of ARF 126600 is completed to be perfect.

Bezel

The bezel uses ceramic insert on both factories. About bezel tooth, AR is a bit sharp, while Noob’s is a bit smooth and has a better touch. The sharp of each tooth on Noob 126600 has a rounded chamfer polishing, so these teeth feel smooth. About the bezel pearl, it looks a little greenish, while Noob’s looks more white, the bezel pearl of AR 126600 is closer to genuine. The inlaid method of the bezel pearl is also different, Noob sticks it with glue, while AR inlays the pearl into, if you check the Noob 126600 carefully, there is glue mark around the bezel pearl, while AR’s is very clean. Because the installation of bezel pearl is different on both factories, Noob’s is a bit higher than its edge around, while AR’s is correct, the same as genuine, it will also not easily fall off. About bezel engravings, AR 126600’s are deeper than Noob’s, because Noob’s bezel engravings are shallow, the platinum coating is exposed to dust and sweat on your hands, so the white coating will easily become black. While the bezel engravings on AR 126600 are much deeper, they can avoid the contact with hand sweat, so after a long time wearing, they still look very clearn. So, about the bezel finish of 126600, I think AR wins.

Dial

I can hardly find difference. Both Noob and AR have made a good dial. About the letters below red “SEA-DWELLER”, AR’s are slightly plump, while Noob’s are a bit thinner. The lume coating on the dial is a little yellowish on Noob, while AR’s is very clearn.

Helium Valve Button

On the side of the helium valve button, Noob has a qr code sticker, while AR factory does not have. Noob makes it correct. The helium valve button on both factories do not work. While I think AR makes the helium valve button correct because they do a better finish on the button.

Bracelet

Both AR and Noob use 904L stainless steel to make the bracelet. While I think that the 904L stainless steel used by AR is the best in entire watch market. The first touch feeling which AR Rolex gives you is excellent, whether on the case or bracelet, the finish on AR 126600 is superior. On AR 126600, if you check the first link of the bracelet that connects the case, its compactness with the links on both sides is made better, Noob’s has a small gap. The crown logo on the buckle looks more three-dimensional on AR 126600. So, about the bracelet, I think there are no other factories that can compare the quality of AR factory.

Movement

This is the only advantage of Noob factory, because Noob offers a 3235 movement option for this Sea-Dweller 126600. I did not say the Asia 2824 on ARF is not good, it is also a very good movement, even more stable than the clone 3235 and Asia ETA 2836 used by Noob 126600.

Conclusion

Whether in material or finish, ARF Sea-Dweller Single Red 126600 is the best. About the movement, I still vote for ARF, because the Asia 2824 movement is more stable. Now, AR factory almost has occupied the entire market of Sea-Dweller 126600, about the after-sale service, Noob’s repairing service is very slow, this is also a big reason why I do not recommend Noob here.

Photos and video of Noob 126600

Noob Rolex Sea-Dweller 126600

Photos and video of ARF V3 126600

ARF Rolex Sea-Dweller 126600 V3

Noob Factory Replica Rolex Daytona Yellow Gold Green Dial with Super Clone 4130 Movement

Noob Rolex Daytona Yellow Gold Green Dial

Now, Daytona is the proud of Noob factory, it has become the flagship model of Noob, which is more popular than their Submariner 116610LN and 116610LV. Since the usage of 904L stainless steel in replica watches industry, the emphasis which every factory puts on is the development of replica Rolex, especially the production of Daytona, which directly affect the competitive relationship between Noob and ARF.

In my last post, I said Noob is ready to release two yellow gold Daytona watches, now both watches are available. Here I will give a short review one of them, it is the yellow gold one with green dial.

The case of this yellow gold Daytona is 12.5mm, which almost has the same thickness as original. Thanks to Noob’s newly developed 4130 movement, so the thickness of the entire case has been reduced, at the same time, the movement can also achieve all functions of original. The inner case material is 904L stainless steel, while the outside yellow gold coating is up to 5 mils thick.

Green dial is my favorite, it makes the Daytona suitable both for men and women. Every small dial works very well, each features a red circle inside. The small second hand is on the subdial at 6 o’clock, other two small dials are for minute and hour chronograph display. To reduce the probability of failure, we suggest you do not operate the chronograph buttons too often, this is true for Daytona from Noob and ARF.

However, it seems like this Super Clone 4130 movement developed by Noob factory has few repairing rate, my clients ordered two Noob Daytona from me in last yesterday, he told me that both watches still work very fine. I think this Super Clone 4130 from Noob is more stable than their 3135 movement.

AR factory also makes this green Daytona, but I think some tiny details like dial printings, case engravings and inner bezel engravings are not as good as this one from Noob, however, Noob has a much higher price, which is even $300 USD more expensive. The Daytonas from both Noob and ARF are good, if you have enough budget, then Noob is a better decision.

Big News from Noob Factory and Pre-Order Accept Now

After our holiday, there are exciting news coming from our watch market, the biggest one is that Noob will immediately unveil the V10 edition of Submariner 116610LN and 1166LV, and they will also publish the full golden Daytona and green Daytona at the same time. As Noob’s technology on their 4130 movement becomes more mature, they will install this movement in more Daytona watches, so we will have more choices than before.

Besides the release of the green Daytona this time, Noob will bring us a big surprise, that’s the Submariner 116610LN and 116610LV, which will be upgraded to V10. Noob claimed that many improvements were made on V10, but I see the biggest change on the movement, please check the movement photos below, it is 3135, can you tell it is a real or a clone? It is a clone 3135 but I can not see any difference.

Among all watch manufacturers, only Noob makes the best clone 3135 movement that looks closest original Rolex 3135. From V6 to V10, Noob has improved a lot, especially on the movement, to guarantee there are no issues. The new 3135 has three big features, better decoration on movement plate,noiseless auto rotor and balance spring.

Noob 4130 Daytona Gold Models:

Noob Daytona Gold 4130
Noob Golden Daytona
Noob Green Daytona

Super 3135 movement used in next V10 Submariner 116610LN and 116610LV:

Noob 3135 V10

VS Factory Replica Panerai PAM 984 Submersible Mike Horn Titanium Watch with Super Clone P.9010

Replica Panerai PAM 984

Whether PAM 979, PAM 1616, PAM 616 or PAM 799, these Panerai replica watches which VS factory has published in recent two months all belong to Submersible models, today, I want to introduce another Panerai Submersible replica watch, it is a special edition for Mike Horn, the genuine watch has a reference PAM 984.

Replica Panerai PAM 984 Titanium
Replica Panerai Submersible Mike Horn
PAM 984 Black Dial

Now back to this PAM 984 replica watch, it is an art work from VS factory. The watch is fully made of solid Titanium material, like other Luminor Submersible models, this special edition uses a 47mm case that is fully brushed, while the case is not too thick, it is only 15mm, not 17mm thick. The bezel is uni-directional rotating, it has engraved markers that are brushed in sand-finished bezel background, this looks amazing and gives a strong visual effect.

PAM 984 Crown Bridge
PAM 984 Titanium Case

The dial is black, it is sandwiched, the upper plate has skeletonized hour markers, the plate at bottom is painted with Swiss Grade SuperLume. Please notice, this PAM 984 is different from other Submersible models, it is like Omega Planet Ocean, the dial has two different lume light color, when you check the watch in dark condition, the minute hand looks blue, other hands and all hour markers look green. The subdial does not look like the one of traditional Luminor Submersible models, it looks more technological. This is a Mike Horn special edition, I think Panerai just let it looks unique.

PAM 984 Shark Case Back

The case back is solid and has detailed engravings, there is a big shark logo and Mike Horn signature, it looks so special. Open the back, the movement inside is a super clone P.9010, VS factory claimed that they made this movement according to genuine Panerai P.9010, we believed it is a custom-made, but it absolutely can not be compared with genuine Panerai P.9010. Somebody said it does not have difference, but I must say that the power reserve of this clone P.9010 is not that long like genuine. So, I suppose this clone P.9010 is also based on a Chinese automatic movement, just with decorated plates and auto rotor, and also the balance wheel is changed to correct position. So, never think that a replica watch can have the same movement as original watch.

PAM 984 Black Nylon Strap
PAM 984 Pre-V Buckle

At last, about the water resistance you guys mostly concern, you can wear the replica watch while washing your hands and swimming, but do not go to a deep diving with it. By the way, not all replica watches can accompany you to swim, this is true. Sometimes your dealer can pick up a good replica with perfect water resistant performance, sometimes if the watch is not sealed well, the water can easily penetrate the case.