Tag Archives: Titanium

VS Factory YachtMaster Titanium 226627 Free Sprung

I already said that VS Factory will publish the free-sprung 3235 movement before in my last article at https://www.susanreviews.com/2026/06/08/two-big-news/, now the movement comes, but is it the true free-sprung 3235 movement? Everybody has different opinions about this, but I do not think it is a real free sprung movement, it does not have weights, just like the clone 4302 movement they developed for AP 15500 before.

Look at the clone 4302 movement from VS Factory, there are no weights on the balance wheel. To correct the inaccuracy, you still need to adjust that regulator I marked.

About the YachtMaster 226627 from VS, I introduced the Clean version at https://www.susanreviews.com/2025/05/26/clean-titanium-yachmaster-42mm-226627/, which was the best one at that time, after the closure of Clean, perhaps you guys do not know where to get the best one, actually ARF is a great choice.

How about the one with new free-sprung 3235 movement from VS? Please check its pictures below first.

VSF Free-Sprung 3235 — New VS Free-Sprung 3235 Movement

Genuine Rolex 3235 movement — Genuine Rolex 3235 Movement

At first glance, we can clearly see the new clone 3235 movement indeed lacks a regulator if you compare it with the old 3235 movement from VS. But if you compare the new clone 3235 movement with genuine Rolex 3235 movement, you will find the former does not have weights on the balance wheel. However, with a solid case back, people do not see the movement inside, that’s also the reason why a lot of people think it is no need to buy the free-sprung movement, because almost all Rolex models have solid case back.

After this 3235, I think VS will publish the free-sprung 4131, but I do not know when. For all DD series movements, the free-sprung movements published by VS factory in future will not feature weights.

About YachtMaster 226627

2 Replies

This watch was more popular in the past than today, especially when Clean factory published it in May https://www.susanreviews.com/2025/05/26/clean-titanium-yachmaster-42mm-226627/, 2025, but after the closure of Clean, few people are discussing this watch today, but that does not mean there is no good replica for this YachtMaster, some people thought only Clean has the best Rolex, now they need to change their minds, like I said before, every replica is not perfect, and the replica from each factory has their own advantages. So now which factory makes the best replica of this YachtMaster?

Currently a lot of factories make this replica watch, including TW, EWE, QF, Clean Plus, Victory, ARF. If you want the most affordable one, I recommend EWE. If you want a high-end one, please check with QF, Victory and ARF, and I do not think there is too much difference between these three factories. QF and ARF have been in this industry for more than five years, their watch quality and quality control are trusted. Victory is a new factory and many dealers said their watches are the same quality as previous Clean, I got one Daytona from Victory last week, and found it indeed uses many watch parts that were used on Clean clone watches. The quality of Victory Rolex is no problem, I only have a little bit worry about their quality control, after all they are a beginner. Among these factories, I do not suggest you buy from Clean Plus, which is also called C Plus.

If I were you, I will consider ARF first when buying this YachtMaster watch. They upgraded the movement to DD3235, and the pin that connects each link of the bracelet also uses ceramic tube. Currently only makes Rolex, and the movement of their GMT-Master has also been upgraded to DD3285, but at the same time they also supply the Rolex SH3235 and SH3285. There have been a controversial topic on which movement is better between SH3235 and DD3235, I do not think DD3235 is better in each aspect, otherwise people won’t buy from QF.

The following pictures show the YachtMaster 226627 from Victory. It is a good watch but not perfect. Two obvious flaws I can notice when firstly got the watch, the matt finish on the ceramic bezel is too delicate, while on genuine watch it should be more obvious. Second, the bezel rotation is too smooth. The finish of other places is in quite high quality level.

By the way, VS Factory currently does not make this YachtMaster, but they are about to publish the Daytona 126518 with turquoise dial.

OR Factory Seamaster Bronze Gold Green

Leave a reply

Our new year holiday just begins. Tonight is New Year’s Eve, a wonderful time for family reunion. I do not feel happy everyday, even at this special moment, nobody cares what has happened to me, it has been a long time for me not to laugh loudly.

Today, I want to bring you a replica watch made by OR Factory. About OR Factory and its Seamaster replica watches, I introduced them before, please read at https://www.susanreviews.com/2025/12/08/or-factory-seamaster/ and https://www.susanreviews.com/2026/01/26/seamaster-no-time-to-die-vs-vs-or/. This replica watch is another Omega Seamaster from OR, it is a bronze gold model with a green face, which is not a new model, VS published it before, and later they updated its movement.

In the second half of 2025, there are several important moments, for example, Clean was closed, VS published V2 Datejust, APS published 4401 movement with free-sprung balance, the birth of the DD8806 movement, etc. Among these important moments, the DD8806 movement developed by VS is exactly used in the Omega Seamaster bronze gold model, it is also used in the V4 Seamaster No Time to Die by VS. While in this Seamaster bronze gold, OR Factory uses a SH8806. So, there is a discussion about which movement is better, in my opinion, it will not be bad if you buy any one of them, both are good movement, in the finish of some subtle details such as polishing and engravings on the movement plates, I prefer the SH8806 from OR.

The replica watch from OR comes with a mesh bracelet that is made with titanium, the factory also offers a green rubber band with a deployant clasp. The rubber band from VS comes with a pin buckle, this is another difference.

Here are pictures of the Seamaster bronze gold from OR.

Replica Omega Seamaster Bronze Gold Green

The following is a comparison between the replica and genuine. Which one do you think is the replica, the left one or the right one?

Seamaster Bronze Gold Replica vs Genuine

Both bezel and dial have color difference, but not very obvious. The replica has an extra regulator on the balance wheel, the decoration on the movement plate is very close. The genuine watch has a bigger Omega logo on the clasp. On this OR Seamaster, its crystal has a closer shape to that of the genuine than VS, but the OR Seamaster has too obvious blue AR coating, genuine watch does not have.

U mi RM016

3 Replies

The first square Richard Mille watch I have seen. RM016 is made by U mi studio, which is a new name in this industry, but is actually operated by a factory that has been in this business for many years, it is ZF. ZF was a big famous watch maker before, more popular than APS factory, but now I even doubt that ZF does not exist after that raiding happened years ago. Why do I think so? Because ZF used to be more active, they usually published new watches in front of APS, but today, we seldom see new watches or improvements on existing models made by ZF, the situation is, a long time after APS released the new model, ZF finally promoted the same watch, this is strange. Or actually ZF is also operated by the same team APS? Anyone who wants to invest in developing new replica watches can use ZF name to sell them.

RM016 is a new model, no other factories make it, now only U mi has this watch, price is expensive. Some dealers said U mi is a high-end studio and makes the best Richard Mille replicas, this is not true, take this RM016 as an example, the replica is made with titanium, but genuine watch has a special processing on the titanium, so if you compare the case between the replica and genuine, you will see color difference. The thickness of the case is about 9.6mm, which is still a bit thicker than that of the genuine. Well, I am attracted by its square case, skeleton dial and the unique look of the auto rotor. However, do not buy this watch currently, there will be improvements made in future if this is really a popular RM watch.

What other Richard Mille watches does U mi have? Yes, they make some popular models like RM35-02, RM055 and RM67-02. The former two are also produced by APS, and APS is the first to offer the RM35-02 and RM055 with free-sprung balance movement, now ZF uses name U mi to sell these two Richard Mille watches, their intention is obvious, to pose as a high-end studio so that buyers think they are superior. Actually their quality is the same as that of APS.

Clean Titanium YachMaster 42mm 226627

6 Replies

Is this the first titanium watch made by Rolex? It is a popular watch and many people have asked if there is a super clone in the market. The first factory that made its replica is EW, several months ago, this factory was shut down, everyone knew the reason. Later a new manufacturer named EWE apppeared, does it have some relationship with EW? Maybe a new factory or still EW. Any way, before Clean, everyone chose this titanium YachtMaster Rolex from EWE. TW+ also made the replica, there are many factories using TW name, such as TWA, TW and TW+, I do not know what is the relationship between them, but they are not involved in manufacutring super clones, they provide cheap to middle quality replicas. For this titanium YachtMaster replica, EWE uses a Hangzhou 3235 movement, which has nearly 72 hours power reserve and is very reliable. The replica from TW+ is equipped with a Shanghai 3235, I am not sure if they are using the updated version released later. But in my memory, the Hangzhou 3235 used by EWE is good.

Back to the titanium YachtMaster 226627 made by Clean, it is fully made with titanium, so the weight is very close to that of genuine watch. With the Clean sticker on the bracelet and plastic cover, the replica has a weight of 109.6 grams, the genuine watch weighs about 107.4 grams. The replica is made with grade 5 titanium, it looks not that bright like stainless steel, this material is very hard, so it is a bit difficult to complete a very good finish on the case and bracelet, but Clean does a job work. Please look at the following pictures, on the enlarged picture of the bracelet, some brushed lines look coarser, but from a viewing distance, this is unnoticeable. On genuine watch, the brushing is also more obvious, but I think every brushed line has the same thickness. I do not think it will be a flaw for this replica watch.

On the bracelet, the engravings on the clasp are correct. But I found one tiny flaw on the clasp when it is closed. Look at the picture, the left metal piece stands slightly taller than the right metal piece, they are on the same horizontal line on the genuine watch. I do not know if all replicas of this watch made by Clean have this flaw, or just the one in my hand.

The case has a thickness of 11.89mm, less than 12mm. The tube of the pin that connects each link of the bracelet uses ceramic material, Clean claims this is also a feature on the genuine watch. The ceramic tube is highly scratch resistant and after a long time of wearing, the links can still locks firmly, you will not feel the bracelet becoming loose.

The movement inside is a SH3235, which is widely used by Clean in the Datejust, it is the new version of SH3235, Clean said it is also 72 hours of power reserve, but I said this is not true in another post. Well, because this movement has also been widely used by other factories, so I think its stability is acceptable.

The bezel insert is black ceramic in matt finish, which is in contrast with the bright polishing on the markers. The matt finish on the genuine is more obvious, while on the replica, it is more refined.

Overall, the finish of the Clean version absolutely better than that of the EWE model, but Clean also has a much higher price. Whether you buy from Clean or EWE, it will be a right decision.

Replica Rolex YachtMaster 226627 Titanium

Rolex YachtMaster 226627 Clasp Extension

VS Factory V4 Seamaster 007 No Time to Die

8 Replies

It was about two weeks ago, the latest V4 edition of Seamaster 300m No Time to Die from VS Factory just came out, it is said this is the ultimate version of this replica watch, with the latest super clone 8806 movement just developed by VS. This Seamaster 007 No Time to Die is very popular, just like the Seamaster Spectre, in my memory, VS Factory just made improvements for three times on the replica, the replica watch firstly came out years ago is made of stainless steel, on V2 edition, VS Factory made the case with titanium, on V3 edition, VS updated the bracelet with titanium, and on this V4 edition, the movement is now changed to a super clone 8806. On some dealers webiste, they saying that this replica is V5 or V6, does VS really make improvement four or five times on the replica?

The V3 edition is out of stock. Now in the market, VS Factory has V2 and V4 in stock, V2 has a titanium case and a steel mesh bracelet, V4 is totally titanium made, its weight is about 96.9 grams, which is 4 grams lighter than that of genuine watch.

About the movement, it is indeed a super clone 8806 movement, not based on the Sea-gull 2824 and added with extra plates on top. However, this super clone 8806 movement is not exactly the same as the genuine Omega 8806. The balance wheel is slightly different. After removing the auto rotor and next plate, we can see the movement structure clearly, please check the last movement picture below, if you compare it with genuine Omega 8806, you will find the difference. But this super clone 8806 is already good enough. However, it is not like Dandong 3135 and Dandong 3235 as well as APS 3120 movement, whose components can be interchanged with genuine movements. This super clone 8806 has the same level as the 8500 and P.9000 movement from VS Factory.

Conclusion:

Fortunately this Seamaster No Time to Die has a solid case back, people are not able to notice the difference on the balance wheel. But it is exactly because of its solid case back, I think it is not necessary to spend more money to buy the V4 edition. For most watch fans, the V2 already has a very high quality, its stainless steel bracelet is better finished than the tianium bracelet on V4, besides, the movement in V2 is also very stable even it is modified on basis of a Sea-gull 2824, its stability has been tested for years.

Replica Omega Seamaster No Time to Die V4

VS Factory V3 Replica Omega Seamaster 300m No Time to Die

Leave a reply

Correct, we usually call it V3 edition, on some dealers websites, they may call it V5. This replica Omega Seamaster was firstly produced by VS Factory in 2020, now in the beginning of the 2025, they made an important improvement on this replica, which finally manufactured a titanium mesh bracelet out for this watch. The last version, also V2, is equipped with a stainless steel bracelet. Now with the updated titanium bracelet, the entire watch will have a weight of 95 grams, the titanium bracelet weighs about 37 grams separately. Why VS Factory did not use a titanium mesh bracelet on the watch in 2020? Actually it is hard to make a perfect mesh bracelet with titanium material before, and on the V3 edition, I think the finish on the titanium bracelet is also not as good as that on previous stainless steel bracelet.

Replica Omega Seamaster No Time to Die Titanium

Replica Omega Seamaster No Time to Die V3

Omega Seamaster No Time to Die Black Dial

Omega Seamaster No Time to Die Case Back

Omega Seamaster No Time to Die Titanium Bracelet

V7 Factory Replica IWC Mark XX Patrouille Suisse Titanium Watch

2 Replies

This is the latest watch from V7 Factory. At the same time, M+ Factory also has produced this IWC replica watch, which factory makes the best one? I think M+, actually I got this watch from M+ and V7 and compared them, I forgot to take photos of the one from M+, but it is true that M+ has a better quality, I will do a comparison review between them in future.

The pictures below are the one made by V7 Factory, which offers clone ETA 2892 and SW300 movement options, I think this is the only advantage of V7 upon M+ on this watch because they have a Swiss movement option, if V7 does not want to improve this watch in future, I suggest you buy from M+ Factory.

The watch is made with Titanium, with a 40mm case diameter and about 11mm in thickness. V7 does not offer extra black or white rubber band for this watch, they only offer one warranty card for the watch. In the following, I will list some places of the watch which M+ Factory does better if compared with V7.

1.The satin finish on the case and bezel is more refined on M+, while on V7, the bezel finish color is slightly different from that of the case.

2.The crown on V7 is much bigger than the genuine, while on M+, the crown size is correct.

3.Both V7 and M+ have a green lume on the dial, but M+ dial lume is brighter.

4.The tip of the central second hand is slight arched, while on M+, it is flat, which is the same as genuine.

5.If you do not choose SW300 version, the Miyota 9015 version offered by M+ should be the best one.

6.M+ Factory offers one pair of black or white rubber band for this watch.

7.The buckle on M+ is better.

IWC Mark XX Patrouille Suisse AR Coating

IWC Mark XX Patrouille Suisse Nylon Band

VS Factory Milgauss 116400 and PAM 1507

2 Replies

VS factory has published these two replicas watches for some time, I remembered they came out before our Mid-Autumn Festival on September 15th, today, I will give you a brief introduction of the two watches.

The Milgauss 16400 is not that popular like Submariner and Daytona, before VS, only GS factory made the replica, few people bought the replica Milgauss, but sometimes, perhaps two or three persons every two months will ask me which factory has the best Milgauss, now I will recommend the one made by VS. Not sure if it has a better finish on the case and bracelet, but the movement is better, it is equipped with clone 3131, which is from Dandong, actually this Dandong 3131 is modified from Dandong 3135, the date module is removed from Dandong 3135, so on this VS Milgauss, once you pull out the crown to the first click position, you can directly adjust the time, just like you do on the genuine watch. Dandong 3135 used in Submariner by Clean and VS is considered to be very stable, now its date module is removed, I think this 3131 is more stable now.

The Panerai PAM 1507 replica is very suitable for you who want a smaller Submersible, it is 42mm, the watch is made with Titanium, very light in weight, which is only about 115 grams, its bezel is blue ceramic, the dial is also blue, but has a clearly readability because of the red small seconds hand and GMT hand. The movement inside is clone P.900, when you pull out the crown to adjust hours and date, you will know the difference between VS Panerai and the PAMs from other watch makers. This P.900 is exactly a super clone of the original Calibre. The GMT adjustment is also simple. You can leave comments if you do not know how to.

V7 Factory Replica IWC Mark 18 Titanium Watch with 2892 Movement

Leave a reply

Not too many new replica watches were published in our market after the raid, especially in IWC. As the biggest watch manufacturer who makes the best IWC replicas, ZF did not bring new IWC watches in this year. Today, I went to our watch market and found many watch stores were closed, there are not too many people buying watches there, a lot of stalls waiting for rent, so we see that the COVID-19 has caused a big influence in this industry, so did the raid. Today, I want to talk about an IWC replica watch from V7 factory, which is not too famous here, this watch is also not a new IWC, in 2019, a factory named M+F already made it, and so did MK factory. The entire watch is full of military style, I love this style very much before, but now I like a watch with clean and fresh style more.

IWC Pilot must be one of the most attractive military watches, especially its sub-series Mark, which has come to Mark XVIII edition. About IWC Mark series, its dial elements, unique engravings on case back and strap design, all of these make you want to consider it when you need to buy a military-style watch.

The watch is full of vintage flavor, its Titanium case looks not as bright as stainless steel, the Titanium case and case back are satin-finished, so is the clasp, on its black dial, the luminous material applied on hour markers and hands is not white, it looks a little yellowish, which is completely in line with the darken Titanium tone on its case. The band is made with brown leather, it is the last piece to make such a low-key but perfect replica watch.

It is a very simple watch, so there are no difficulities when making a perfect replica of of this watch, the dial details you can see from these pictures are already good enough, when you show this watch in front of your friends, they are not able to tell it is a fake, even a watch expert will say it is a genuine watch. By the way, V7 factory offers two movement options for this replica watch, one is a clone 2892, the other is a real Swiss ETA 2892.

Susan Reviews on Replica Watches

Find the watch you like.

Tag Archives: Titanium

VS Factory YachtMaster Titanium 226627 Free Sprung

About YachtMaster 226627

OR Factory Seamaster Bronze Gold Green

U mi RM016

Clean Titanium YachMaster 42mm 226627

VS Factory V4 Seamaster 007 No Time to Die

VS Factory V3 Replica Omega Seamaster 300m No Time to Die

V7 Factory Replica IWC Mark XX Patrouille Suisse Titanium Watch

VS Factory Milgauss 116400 and PAM 1507

V7 Factory Replica IWC Mark 18 Titanium Watch with 2892 Movement