OME, which just appeared in this industry, has forced PP Factory to make improvement on the movement of replica Nautilus 5712. Last time, PP Factory made deeper engravings on the 240 movement of replica 5712, I talked this in previous post at. OME only made the replica Patek Nautilus 5712, including the stainless steel model and golden model. I know you guys have seen a lot of reviews about OME 5712, some reviewers said OME makes the best replica 5712, which is much better than the one from PP Factory, here I took the golden 5712 from OME to make a simple comparison, please chck the pictures below.
On the first picture below, the left golden 5712 is from OME, the right stainless steel 5712 is from PPF but has been replaced with SW dial, hands and moon phase. Some reviewers said that OME uses the same SW watch parts, but I still found that SW dial, hands and moon phase on the right watch are better. However, we can see that OME uses a solid axis for the hands.
On the second and third pictures, it is the case comparison. The middle case is thinner on OME 5712, but the entire case on both watches has the same thickness. On the end of the lugs, its shape is finished so well on OME 5712, it looks much better than that on PPF 5712. If you want to replace the dial, hands and moon phase on PPF 5712, you need to pay a lot extra money, the total price will be more expensive than that of OME 5712.
Are there any other differences? Like movement? You can comment below.
It is my first time to introduce this Patek watch on my blog, because many people have asked for this watch, I have not reviewed it because there is no super clone movement for this Patek watch, and I think there will not be a super clone movement for it in future, this Patek Philippe Nautilus 5726 is a watch with complicated functions, it is hard to make a super clone movement that can achieve so many functions at the same time, however, if you ask me if there is a good quality replica for this watch, I will say yes, I remembered two factories are making good quality replica of this Patek Nautilus 5726, one is GR, the other if PP. I do not think this replica from PP Factory is much better than the one from GR, but PP Factory charges a much higher price.
It is a good-looking Patek Philippe watch, looks more beautiful and more elegant than the Nautilus 5712 that has been very hot in recent years. I would like to talk about its movement first, it is said to be modified on basis of a Japanese Miyota automatic movement, PP Factory added extra plate on top of the original movement, then made very similar decoration on the movement plates and auto rotor. So you will find the case must be thicker than that of genuine, I measured it, the case is 40.5mm in diameter and 11.5mm in thickness. On some websites, they are saying this movement is on basis of a Miyota 9015, but I checked Miyota 9015 does not have so many functions, is it real?
The dial is blue, it has central hours, minutes, seconds, date, month, week, moon phase and 24-hour display, it is easy to adjust them through the buttons set on the four corners of the case. Through the button on the case at 2 o’clock, you can push to change the month. Push the button at 4 o’clock, the date will change. The moon phase will also change by pushing the button at 8 o’clock. Through the button at 10 o’clock, you can adjust week display. By the way, the moon phase display is like genuine, it only moves a little bit each day. And the dial color looks very close to that of genuine, much better color than that on their Nautilus 5712 from PPF. However, there are two defects I can found on the dial, first, the date font is a bit sunken, the date on genuine watch is closer to the dial plate. Second, when you pull out the crown to adjust time, the second hand will stop, while genuine watch won’t.
For this 5726 replica, PP Factory also offers two other colors, grey and white. The white dial looks good, at least it does not have color difference.
2024 is an important year both for our watch makers and watch fans, we welcomed a lot of new models that have been made with breakthrough watch-making technology. The absolute protagonists in last year are VS and APS, we do not deny that Clean still occupies the largest market share in Rolex field, but VS has already caught up, and APS indeed brought us many surprises. Hope they can release more super clones in future.
1.Clean Factory V3 GMT-Master II Pepsi
For this GMT-Master II Pepsi, it has been improved by Clean Factory for two times, now the latest version is V3. Upon V2, the biggest improvement lies in its ceramic bezel, it is said that the color has been corrected to look closest to that of genuine, while some persons still like the bezel color on V2, still a bit controversial, however, there are still a large amount of watch fans chose to buy this V3 from Clean. By the way, I also only recommend Clean if you want super clone Rolex GMT-Master.
2.VS Factory Daytona 126500
For the new 12xxxx series Daytona, VS Factory has the best movement, Clean has the most complete collection. Since the last upgrade VS has made on hands of 126500, the sales of their Daytona 126500 suddenly improved. This Daytona 126500 from VS is equipped with a super clone 4131 from Dandong, which is supposed to be better than the Shanghai version used by Clean.
3.Clean Factory Daytona 116518
With a yellow gold case, ceramic bezel and black rubber band, this Daytona is one of the best-selling Daytona replicas from Clean. For the sales of Daytona in the market, Clean still occupies the biggest market share, the competition between VS and Clean in this area is still fierce. Actually, every Daytona made by Clean can be put onto this top ten list, they are really perfect clones.
4.Day-Date Heavy Version
I put this watch here just because the heavy version of Day-Date Rolex is really popular, in the past year, many people were asking the weight of a Rolex they were going to buy. And today in Day-Date field, more and more people are participating in the production of heavy versions of Day-Date Rolex replicas, including GM, QF, K, CBD, THB, etc., customers are also more confused than before. Well, currently I recommend two watch makers, GM and THB. GM is the earliest factory that makes the heavy version, they have price advantage, THB has a high price, but they use super clone 3255, the finish is better.
5.PP Factory Nautilus 5712 V3
The 5712 made by PP or Z has been upgraded to V3, with super clone 240 movement and new clasp. We can see that Nautilus moon phase 5712 from PP is very popular in the market, many dealers provide extra service to upgrade its dial with SW Dial and Hands, just like they do on Nautilus 5711 from 3K.
6.VS Factory Grey Datejust with Jubilee Bracelet
You can buy this Datejust from VS or Clean, both versions are very good. I more recommend Clean version before, but modded watches are very hot today, more people buy this Datejust from VS Factory and then made some modifications, for example, replacing its bezel, dial and hands with the bezel, dial and hands from genuine, this is a great idea, and this won’t cost you too much. The super clone DD3235 movement allows watch fans to to this job.
7.APS Factory RM055
Richard Mille has been very hot in the past two years, APS Factory made big improvements on the RM replicas, especially on the model RM055. This RM055 soon became the best seller in Richard Mille field once being published by APS.
8.APS Factory AP 15407
More AP watches can be put in this position, such as 15400, 15500 and 15720 from APS, but people seemed to be paying more attention to the AP 15407 in past year, since that, APS made a big improvement on the balance wheel of this watch. Many watch fans are still not satisfied yet and seeking for trusted source that could add double working balance wheel, it can be done, but too expensive.
9.QF Daytona Le Mans
QF is the watch maker that produced this Daytona, they provide two versions, regular weight version and heavy weight version. I do not suggest you buy the heavy weight version, because they added extra links to increase the weight. By the way, Clean Factory will also publish the Le Mans Daytona soon.
10.3K Factory Nautilus 5711
This watch deserves a more forward position, it is a very popular watch in modded watch market, many people bought this watch from 3K, replacing its dial, hand and date wheel with SW Dial, Hand and Date Wheel, it seems like more and more people are accepting this modded watch now.
There are a lot of other watches that were also sold very well in the market, especially Rolex watches, there are too many, Submariner, Datejust, Daytona, they can even make a top 10 or top 20, every Rolex coming from VS and Clean should be a super clone, no doubt about this. Every one has their own top 10, I can not include every best seller in this list.
In recent years, one of the super clone watches that have been mostly improved in the market is Nautilus Moon Phase 5712, which is made by PPF, actually it is also ZF. I thought they were two different factories when there was a news saying that they cooperated and developed the V2 Edition of 5712 in last year, actually PPF and ZF are the same watch maker. This replica watch is also one of the best sellers in 2024, I think it is more popular than the replicas in other brand watches like Panerai.
For Nautilus 5712, I still remembered the first improvement was made on the movement, PPF developed this super clone 240 movement and achieved the real power reserve function. The second improvement is on the clasp, now this replica is fitted with the latest deployant clasp that is the same as that on genuine watch. However, when you are looking for this watch on the internet, besides the latest version from PPF, some dealers may provide you with other options for 5712. The first option is the one with SW dial and hands, but still using the 240 movement from PPF. You can buy this one, because after being replaced with SW dial and hands, the replica is closer to genuine. Check the pictures below, the left 5712 is using SW dial and hands, the right one is the original 5712 from PPF. We can clearly see the dial color difference, and after being replaced with the SW hands, the axis of the hands is solid.
Some dealers may provide you with another option, which not only change its dial and hands, but also replace its movement. The pictures below just showing the movement that could be used in the Nautilus 5712. It is a completely custom-made 240 movement from ACE. Well, I do not suggest you buy the 5712 with this movement, because it is not stable. This custom-made 240 has a free sprung balance wheel, not index regulated, although this feature makes the movement look closer to genuine 240 calibre, the movement accuracy can not be guaranteed. The custom-made 240 movement also has a much better decoration on the movement plate, you can see the engravings, whose thickness and color are very close to that of genuine, the micro auto rotor is 18K gold made, solid gold. However, this movement is too expensive, need thousands of US Dollars, and its stability is so unsure, so I do not recommend the 5712 with this movement.
It has been a long time not to see new arrivals coming from PP factory, which is also called PPF by most people, and after seeing my reviews on so many watches, you have known that PPF has another name, which is ZF. They have a lot of super clones, including IWC, Patek Philippe, Audemars Piguet, but nothing in Rolex. ZF tried several times and also wanted to succeed in super clone Rolex, but failed every time. Well, in my opinion, I think every super clone watch from ZF replacable, sometimes I think their watches are overpriced.
This Patek Philippe Calatrava 6007G is the only new model I have seen from PPF, last time about three years ago, they made a similar model, which is 6007A, it seems like this new 6007G has the same design as 6007A, it has a 40mm case diameter and measured to be 10.5mm in thickness, but still more than 1mm thicker than the genuine watch. The 6007G has three color options, blue, yellow and red. I went to their store and got this yellow one.
The watch is a super clone Patek, every detail is perfectly finished, the round bezel is a classic design of the Patek Philippe Calatrava, it is polished and looks very elegant, PPF finishes the case with smooth polishing on every edge of the case to guarantee a very good wearing comfort. The replica almost has no flaws on the case, except its thickness, but I do not think people can notice the difference on case thickness, which is only 1mm difference. The yellow color on the dial perfect matches with the yellow stitching on the leather band, the carbon pattern on the center of the dial is also in line with the carbon pattern on the leather band.
PPF uses a super clone Patek 330 movement in the watch, this is the best clone movement used in super clone Patek Philippe watches, the movement developed by 3K factory and rarely has issues, it has an incredible stability and the inaccuracy is accepted. I think there are two most important movements in fake watch industry, the first one is Dandong 4130, the second one is this 330.
