Tag Archives: OME Factory

OME 5712 V2 and 5822P

About OME, it has been a long time not to hear the news about this factory, last time, about several months ago, OME published a great replica Patek Philippe Nautilus 5712 and caught the attention of many watch fans, their Nautilus 5712 is indeed a very good replica, compared with the 5712 from PPF, OME version has better dial color, better moon phase, better hands and better movement engravings, they disappeared after selling this watch for a while, I do not know why they disappeared, now OME starts to accept orders and published the V2 edition of the Nautilus 5712.

For the V2, the change was made on the movement, please check the two places I mark in red, these are two differences between V1 and V2.

Golden Tube

Golden tube around this ruby.

C-shaped opening in this place.

The movement plate has much deeper engravings than that of PPF 5712, and on this V2, the movement plate also looks brighter and cleaner.

However, now ordering a Nautilus 5712 from OME needs to wait for a bit longer than usual.

Next, let’s see the pictures of the Cubitus 5822P from OME.

Replica Patek Philippe Cubitus 5822P
Replica Patek Philippe 5822P
Replica Patek 5822P Blue
Patek 5822P Case
Patek 5822P Crown
Patek 5822P Movement
Patek 5822P Blue Band
Patek 5822P Buckle

This Cubitus 5822P is hot, many people already asked me if there is a super clone of it, before OME, P1 and PPF made this replica, PPF and OME use the same super clone 240 movement, but the movement from P1 is not close to the genuine movement, and their watch has a too high price. Like 5712, PPF also does not have a deep engraving on the movement plate, please check the picture below.

Movement from PPF

Look at this picture above, the movement plate has a very shallow engraving on PPF 5822.

P1 5822

Look at the movement on the 5822 from P1 Factory, the micro rotor’s position and balance wheel position are wrong.

PPF 5712 Dial Color Upgrade

Last time, I talked about the improvement which PPF made on the replica Nautilus Moon Phase 5712 in article https://www.susanreviews.com/2025/03/31/two-improvements-from-ppf/, that improvement is the engravings on the movement plate, which become deeper. Just yesterday, PPF announced another improvement on the dial color of the V3 5712, I got the watch yesterday night and took some pictures for you. The dial looks really better than before.

Before, many watch fans would like to get a Patek Philippe 5712 from PPF and then changed a SW dial on because SW dial has a more correct color, now it is not necessary to do this because the new dial from PPF has a correct color. Before this update, I made a comparison between PPF 5712 and the one with SW Dial in article https://www.susanreviews.com/2024/12/31/ppf-nautilus-moon-phase-5712/, we can clearly see the dial of the PPF 5712 looks slightly purplish, now you will not see this issue on the new dial from PPF. Look at the pictures below, actually the dial color looks more authentic than it on the pictures, you will be satisfied with the dial color after seeing the actual watch.

After the improvement, the dial color even looks better than that on SW dial, but is is absolutely much better than the dial color of OME 5712, on the 5712 from OME, the dial looks slightly gray.

About the finish on the edge of the hour markers, SW does a better polishing and the chamfering is more noticeable, which is closer to that of genuine. While PPF and OME have the same finish on the hour markers.

About the color on the hour markers and hands, SW dial is better, its color on the markers is the same as that on the hands. While on PPF, there is still slight color difference between the markers and hands.

My conclusion:

If you have enough budget, I still suggest you choose a PPF 5712 and then change with a SW Dial. SW Dial has a very good dial color and good finish on the hour markers.

The OME 5712 is also very cost-efficient because its case is made correct especially on the lugs.

PPF 5712 Blue Dial
PPF 5712 Dial Color
PPF 5712 Color
PPF 5712 Moon Phase Dial
PPF 5712 V3
PPF 5712 Dial Upgrade
PPF 5712 Dial Close up
PPF 5712 Power Reserve
PPF 5712 Better Dial

Nautilus 5712 OME vs PPF

OME, which just appeared in this industry, has forced PP Factory to make improvement on the movement of replica Nautilus 5712. Last time, PP Factory made deeper engravings on the 240 movement of replica 5712, I talked this in previous post at. OME only made the replica Patek Nautilus 5712, including the stainless steel model and golden model. I know you guys have seen a lot of reviews about OME 5712, some reviewers said OME makes the best replica 5712, which is much better than the one from PP Factory, here I took the golden 5712 from OME to make a simple comparison, please chck the pictures below.

On the first picture below, the left golden 5712 is from OME, the right stainless steel 5712 is from PPF but has been replaced with SW dial, hands and moon phase. Some reviewers said that OME uses the same SW watch parts, but I still found that SW dial, hands and moon phase on the right watch are better. However, we can see that OME uses a solid axis for the hands.

On the second and third pictures, it is the case comparison. The middle case is thinner on OME 5712, but the entire case on both watches has the same thickness. On the end of the lugs, its shape is finished so well on OME 5712, it looks much better than that on PPF 5712. If you want to replace the dial, hands and moon phase on PPF 5712, you need to pay a lot extra money, the total price will be more expensive than that of OME 5712.

Are there any other differences? Like movement? You can comment below.

OME vs PPF 5712
Case Comparison 5712