Monthly Archives: July 2026

WS Factory Aquanaut

Last time, I introduced the Nautilus 5712 from WS Factory. Since WS entered the market, this model has become even more controversial, because none of the versions currently made by the different factories are perfect. Extra aftermarket parts are still needed if you want to upgrade the watch. For those who are really pursuing a high-quality 5712, buying the watch itself plus all the necessary modifications can become quite expensive.

This time, WS Factory has also released three Aquanaut models, available in green, blue, and rose-gold brown. The factory claims that their weights are the same as the genuine watches. I do not know the exact weights of the genuine versions, but all three WS models feel quite heavy, especially the blue and green ones, each weighing around 150 grams.

There are already several factories in the market producing weighted Aquanaut replicas, including DDF and APW, but neither of them makes versions as heavy as the WS models.

Unlike other factories that make weighted watches, WS uses a high-density precision tungsten material for this Aquanaut. According to the factory, its density is 16.8 g/cm³, the same as platinum, rather than the tungsten-copper alloy, tungsten steel, or steel-wrapped tungsten commonly used in the market.

WS also claims that this material will not oxidize or peel, and that it can be gold-plated. The material is extremely hard, which makes machining very difficult, so production capacity is relatively limited.

The movement inside is the latest 26-330 with hacking seconds feature.

WS Aquanaut Rose Gold
WS Aquanaut Green
WS Aquanaut Blue
WS Aquanaut Rose Gold Movement
WS Aquanaut Blue Movement
WS Aquanaut Green Movement
WS Aquanaut Rose Gold Weight
WS Aquanaut Blue Weight
WS Aquanaut Green Weight

THB 15407 vs Custom-made Version

I previously introduced the V3 version of the Audemars Piguet 15407 from THB Factory, which is currently considered one of the best versions available on the market. What is rather strange is that shortly after THB released this watch, a new name called OCTA appeared in the market and also launched an AP 15407, claiming that its version was the best available.

Later, I saw many people saying that OCTA was selling products previously made by APS Factory. However, as far as I know, APS has not returned to the market. It is possible that someone has contacted some of APS Factory’s former component suppliers and is now selling several Audemars Piguet models under the OCTA name.

The case of THB’s 15407 has some fairly obvious shortcomings, which I discussed in a previous article. You can read it here at https://www.susanreviews.com/2026/06/29/thb-factory-ap-15407-v3/.

Today, I am going to introduce a customized 15407 and make a brief comparison between it and the version from THB Factory.

It is said that the customized 15407 uses a CNC case, you can see the difference between them below.

The watch on the left is the customized 15407, while the one on the right is from THB Factory. As you can see from the area marked by the red arrow, the spacing in this part of the case is different between the two watches.

There are other differences on the balance wheel. The customized 15407 uses a double balance. The THB 15407 only has one balance wheel.

Balance Bridge Color

The color of the balance bridge looks slightly different. The balance bridge on the right is lighter in color, while the one on the left is darker and much closer to the color of rose gold.

The balance wheel on the right THB 15407 is slightly bigger. As indicated by the red pen, the outer rim of the balance wheel is slightly thinner on the customized 15407.

Latest News

WS 5712

Quite a few new models have been released recently, especially since the movement exclusivity agreements came to an end. As a result, many new factory names have started appearing in the market. However, most of these so-called new factories have not actually developed anything from scratch. Instead, they are simply improving models that were previously released by the major established factories.

A good example is the WS Factory Nautilus 5712 that I mentioned in my previous post. WS made some very impressive claims in its promotional materials, but the actual watch is not nearly as good as they advertised.

A friendly reminder: whenever a new factory name appears and claims to have made major improvements to a particular model, do not rush to buy it. In many cases, you may simply end up wasting your money.

AR Factory

Just heard that AR Factory, which is also known as ARF, just changed its name to “W”. All these factories producing replica Rolex watches are operating in a precarious situation, never knowing when they might be shut down.

Clone 330 Movement

Last time, I mentioned that BBF was preparing to release a hacking-seconds 330 movement for the Nautilus 5711. Now, this movement has finally been released and has first been installed in the two Nautilus models shown below.

Hacking Seconds 330 Movement
BBF 5712 Nautilus 330
BBF 5712 Nautilus 330 Rose Gold

Meanwhile, 3K Factory is also feeling the pressure. It has just announced that it will release its own hacking-seconds 330 movement, which will first be installed in the two Aquanaut models shown below.

3K Aquanaut Steel
3K Aquanaut Gold

Seamaster 600m

Two new Seamaster models from VS Factory, black and blue models available now. Before, a factory named VS+ also made these two models plus one orange model. The new Seamaster 600m from VS has a case that is measured to be 42mm in diameter and 13.8mm in thickness. The movement inside is a clone 8912, which is derived from the super clone 8900 movement from VS. At this point, even if VS releases new Panerai or Omega models, I do not expect too much from their attention to detail or overall finishing, because VS is now focusing almost all of its resources on Rolex.

VS Factory New Seamaster 600m

WS Factory 5712 Rep

About Patek 5712, it is one of the hottest watches in the market, several factories and custom-made studio are competing on this model, like PPF, OME(disappeared), GR and some private modification studio. For people who do not have high standards, PPF has updated this watch to V3, it is good enough. But for people who really care details, the one from PPF absolutely won’t fulfill their need. However, if you are considering modifications on a 5712, be aware that this area is very complicated and full of pitfalls. I would not recommend it for newcomers.

Just in last week, a new name appeared and announced that the 5712 they are making has several important upgrades. Having read their promotional content on this watch, I really expected it. But after seeing the actual watch, I must say this is also not the best.

First, let us see the quality of the 5712 from WS.

Does it uses a SW dial like they claimed?
No. Although the dial is good and very close to SW dial, but the moon phase is totally different, look at the picture below, the left watch is WS 5712, the right watch is PPF 5712 with SW dial. The WS 5712’s moon phase background is too blue, and the star is bigger, that does not look good.

And the hands of the WS 5712 indeed have solid center hub, but its shape is not correct.

Dial Color of 5712
WS 5712 on the left, PPF 5712 on the right.

Are this watch’s eagle-beak-shaped lugs really as perfect as the factory claims?
No. Look at the picture below, the left 5712 from WS Factory indeed has a better lug shape, but compare the CNC case, WS 5712’s lug is not perfect.

Beak-shape Lug of 5712

The CNC case has a very good lug shape.

WS Movement Engravings
The movement of WS.
PPF movement engravings
PPF movement engravings

Although PPF improved the 240 movement engravings before, but their movement engravings still look slightly thinner and shallower than that of the movement in WS 5712. But the movement engravings on both watches do not look as neat as that of the genuine.

At last, the case thickness of WS 5712 is about 8.6mm. It is a good watch, but not as good as they claim to be. I do not suggest you spend such a big money on this watch.