The Best PP Aquanaut 5165A Replica Watch From Z Factory

Replica Patek Philippe Aquanaut Black

Nautilus and aquanaut are two best-selling models of Patek Philippe, both also have a high popularity among those sports watches, especially Nautilus, which is considered to be a must-have stainless steel watch. In fake watch industry, there are several full stainless steel watches that are worth buying, Nautilus is one of them. Many factories made Aquanaut and Nautilus in our market, the most famous are two manufacturers, ZF and PF, both of them have made good quality replica watches of 42mm Patek Philippe Aquanaut, in the future, I will write one post to compare the 42mm Aquanaut between ZF and PF, however today, I will introduce the new watch from ZF, it is a new Aquanaut with 38.5mm in case diameter.

Replica Patek Philippe Aquanaut 5165A
ZF Replica Patek Philippe 5165A

Compared the 42mm model, this Aquanaut is much smaller in case diameter, which is only 38.5mm, the case thickness is also only 8.6mm, less than 9mm on 42mm Aquanaut. So, for this Aquanaut 5165A, it is more suitable for people who like a samll size sports watch. The bezel of the Aquanaut looks unique, it more looks like a round, a bit slightly octagonal. About case, it has a high quality finish, compared with the finish on PF Aquanaut, I think ZF’s is better. The entire case is slightly curved, and every corner is smoothly polished without scratch touching, so the wearing comfort is highly guaranteed.

Patek Philippe Aquanaut Stainless Steel Case
Patek Philippe 5165A Crown

The dial is black, the texture on the dial makes Aquanaut unique and famous. The high legibility is another big selling point of the replica watch, besides the big square markers, there are also Arabic numbers, each marker is applied Swiss luminescence, so is hours hand and minutes hands. The white markers and hands are clearly readable not only because of the black background, but also due to the strong green lume light in dark situation.

Patek Philippe Buckle
Patek Philippe Aquanaut Black Rubber Strap

About the movement, ZF uses an imported Japanese Miyota 9015, on its basis, some modification has been made on the auto rotor and movement plates to make it closer to genuine PP324 Calibre, actually ZF made it. The golden SEALs on the movement plate are correct, the jewels are also in right color, this is also the only one clone PP324 movement in our market whose balance wheel is in right position. So, even this is a replica with see-through crystal back, you will not be afraid to show it in front of your friends.

Patek Philippe Clone Movement

In conclusion, this new 38.5mm Aquanaut from Z factory is a replica watch that worth buying, it is exactly the perfect replica you are looking for, although the price is much higher than replicas from small factories.

Patek Philippe ZF Package

Z Factory Replica IWC Spitfire IW387903 with Brown Leather Strap

Replica IWC Pilot Chrono Spitfire

Pilot is one of the most successful series IWC has ever published, it has so many classic models that a lot of people are in pursuit of them. In 2019, IWC is the winner because they unveiled several watches that deeply attracted the eyes of our watch fans, including Pilot Bronzo, Pilot Chrono Spitfire Chrono and this Spitfire IW387903. as one of the few brands that make Pilot’s watches, IWC may be is the most successful, I like the design of IWC, it is more suitable for Asian than other Swiss brands.

ZF Replica IWC Spitfire Chrono
Replica IWC Spitfire Black
Replica IWC Spitfire IW387903
Replica IWC Spitfire Black Dial

In May 2019, I introduced one IWC Pilot replica watch that is made with bronze material, today, I want to show you another great Pilot Spitfire watch from another factory, which is Z factory. We know V6 is a big factory and they make a lot of good quality replica IWC watches, but Z factory is the dominance in replica IWC field.

IWC Spitfire Chrono Buttons
IWC Spitfire Case Back

This replica IWC Spitfire watch from Z factory has a big advantage, that is the sapphire crystal has double AR coating, which looks a bit bluish. So, when you read the time from the dial at any angle, it will be very clear, just like the crystal does not exist.

IW387903 Dial Lume

Besides the crystal, there are other two improvements Z factory has made on this replica watch. First, the circles on subdials are made more delicate, their thickness and spacing between each circle are more accurate, closer to genuine watch. Second, the shape of the hands, especially the propeller-shaped end of the central second-chronograph hand is made correct.

IWC IW387903 Buckle

The final thing you concern about is if the replica watch has a full chronograph function. I must say yes. The watch is equipped with the most widely used Asia Valjoux 7750 movement, you can operate the chronograph buttons like you do on a genuine. Thanks to the solid case, Z factory did not make too much modification on the movement, so it could maintain a high stability of the original movement.

IWC Spitfire IW387903 Wrist Shot

It is a new arrival, but Z factory did not raise its price, it is sold at much cheaper than other Spitfire watches, so I recommend it if you are a pilot watch fan of IWC.

ZF Factory Replica Jaeger LeCoultre Polaris with Miyota 9015 Movement Black Rubber Strap

Replica Jaeger LeCoultre Polaris

The replica watch is made by ZF. The new addition to high end replica watches collection in our market. The watch features a super dial lume and black rubber strap, compared with so many Daytona and Submariner published in recent months, it looks ultra sporty. Polaris is a special watch line from Jaeger LeCoultre, it is also a very embarassing Jaeger LeCoultre watch series, because JLC already has their diver’s watch Compressor Navy Seals, but what is the real purpose they made this Polaris for? I thought it were also made for divers, but I was wrong. So, the genuine watch must have some special usage. As its name Polaris stated, I do not know why ZF factory makes the replica of Jaeger LeCoultre Polaris, it is neither a dress watch nor that sporty like Compressor Navy Seals, I do not think this replica will have a good sales. However, it is from ZF big factory, let’s take a basic review of it.

Replica Jaeger LeCoultre Polaris Black
Jaeger LeCoultre Polaris Black Dial

The 42mm case is brushed with straightforward and arched lugs, slim round bezel is polished, which is contrasting with the brushed surface of the case. There are two buttons on the right case side, at 2 and 4 o’clock. I do not know which crown is for time and date adjustment, which one is for the inner bezel rotating adjustment.

Z Factory Replica Jaeger LeCoultre Polaris with Rubber Band
ZF Replica Jaeger LeCoultre Polaris

The dial makes me think that this is a diver’s watch due to its superlumed hour markers and hands, the dial is indeed full of elements that are necessary for diving watch. Black dial looks classic with big hour markers that features plump Super-LumiNova, the increased luminescence enhances the visibility of hour markers and hands. Besides, the central ring on the black dial has a pronounced grain finish that is highly contrasting with the central sunkened small dial. So, the whole dial looks like having a high quality texture.

Jaeger LeCoultre Polaris Buttons

Another sporty element on the replica is its black rubber band, which is malleable. The rubber band is made of natural rubber material that is directly imported from Malaysia, it is so soft and comfortable to wear. Besides, the replica watch is equipped with a genuine Japanese Miyota 9015 automatic movement, no other Asia automatic movement could be compared with this Miyota 9015, which has a superior accuracy and stability.

Jaeger LeCoultre Polaris Case Back

Movement: Genuine Japan Miyota 9015 Automatic
Case: 42mm*13mm, Solid 316L Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Black with Superlumed Hour Markers and Hands
Bracelet: Black Rubber Strap with Deployant Clasp
Water Resistant: 50m

JLC Buckle

Z Factory Replica IWC Portuguese Annual Calendar IW503502 with Asia Clone 52850 Movement

I have mentioned more than once that Z factory makes the best replica IWC watches, especially the replica IWC Portuguese 7 Days Power Reserve, which is considered to be the most classic watch in our market. The power reserve has reached 3 days, this is a big breakthrough. Now in the beginning of 2019, along with lots of new replica watches published by other factories, this time ZF also brought us a big surprise, they unveiled the latest models of Portuguese Annual Calendar, after the release of these four models, the dominance of Z factory in replica IWC Portuguese field is further consolidated. The following article will give a basic review of these watches and share photos with you.

There are totally four watches of IW503502, three of them are in white stainless steel, the other one has a rose gold case. I will take the stainless steel model with black leather strap for example. The case is made of solid 316L stainless steel, which is measured to be 44mm in diameter, case thickness is 14mm. Round case and thin bezel make the dial look bigger, this is the classic case design of most dress watches. As one of the most popular dress watches, IWC Portuguese has a simple case and elegant dial design. The front face of the lugs are polished, both sided faces of the case are brushed, the arc of the lugs is improved, it is closer to genuine. Case back is see-through sapphire crystal.

On white dial, all functions of the watch are shown on front of your eyes. At 12 o’clock, there is an annual calendar window displaying month, date and week. The small dial at 3 o’clock is a 7-day power reserve indicator, it is showing the remaining power reserve energy of the replica watch, like genuine Portuguese Annual Calendar watch, the power reserve hand of the replica is functional. Although the replica does not have a real 7-day power reserve capacity, it can provide you two-day timing with one full winding.

The IWC Portuguese Annual Calendar replica is equipped with an Asia IWC 52850 automatic movement, ZF disassembled all 326 components of original movement, after lots of trials of data analysis, the clone movement looks 90% the same as original 52850, besides, its adjusting method and winding feel are 100% the same as original. Because this IWC Portuguese watch has a see-through case back, so on the replica movement, ZF factory needs to work hard on the movement decoration. The following are photos of four Portuguese Annual Calendar watches.

Replica IWC Portuguese IW503502
Replica IWC Portuguese Annual Calendar Steel
ZF Replica IWC Portuguese Annual Calendar 7 Days
Replica IWC Portuguese Stainless Steel Watch
Replica IWC Portuguese Annual Calendar IW503502
IW503502 Crown
IW503502 Case
IWC 52850 Caliber
IW503502 Buckle
Replica IWC IW503502 Wrist Shot
Replica IWC Portuguese Annual Calendar Blue Dial
Replica IWC Portuguese Annual Calendar Brown Leather Strap
Replica IWC Portuguese Annual Calendar Rose Gold

Z Factory Replica Tudor Black Bay GMT Blue/Red Bezel with ETA 2836 Movement

Replica Tudor Black Bay GMT

Tudor is a second-tier brand of Rolex, many of its models imitate the design of Rolex, which includes Submariner and Day-Date. Tudor is considered to be the affordable Rolex. Today, the Tudor Black Bay GMT watch is very similar to Rolex GMT Master II with Red/Blue Ceramic Bezel, but its bezel is made of anodized aluminum, not ceramic. This Tudor Black Bay GMT is a new model published in 2018, then it was selected as “best daily watch” and brought a sales big storm. Sometimes, the best-selling watch can not avoid being replicated. Z factory immediately bought the real watch once it was released, after several months of research, they finally published the replica version of this Tudor Black Bay GMT watch. If you are familiar with Z factory, you will know this factory manufactured several pieces of good quality replica Tudor watches in the past, so based on previous experience in replicating Tudor, this replica Tudor Black Bay GMT watch they produced is also in high quality.

Replica Tudor Black Bay GMT Blue Red

Replica Tudor Black Bay Black Dial

Follow the bi-color ceramic bezel design of Rolex GMT, the blue/red bezel is the biggest feature of this Tudor. It is also the first time for Tudor to use such bi-color bezel on their Black Bay series. Although the bezel uses blue and red color, it is matte treated, so the blue and red color does not look that shiny or bright.

Tudor Black Bay Crown

Tudor Blue Red Bezel

Like genuine watch, the replica is measured to be 41mm in case diameter, crystal uses dome-shaped sapphire crystal that features colorless double AR Coating. The dome-shaped sapphire crystal is also one of the biggest difficulties Z factory has to face when replicating this watch. The dome shape also increases vintage flavor. Case is made of solid 316L stainless steel, it is brushed, like the matte finish on bezel. The brushing process also prevents the case from being scratched.

Tudor GMT Watch Crown

Tudor Blue Red Bezel Tooth

Black dial is simple but has a generous layout design. Big hour markers have silver edge and are fully filled with white luminious material, reverse hour hand and snowflake second hand are also one of the features that difficiate Tudor from Rolex Submariner. About GMT function, the red GMT hand works the same as genuine watch.

Tudor GMT Watch Case Back

The Tudor Black Bay GMT replica is equipped with a special rivet bracelet. Each link of the bracelet is made of 316L stainless steel and connected by rivets. The rivet bracelet, blue/red bezel and domed crystal face all add vintage charm to the replica watch.

Tudor GMT Shield Buckle

This Tudor Blue Red replica inherits the top grade craftmanship on previous replica Tudor watches made by Z factory, among those Tudors sold at similar prices, this one will be more attractive due to its blue/red bezel. About the quality of the whole watch, Z factory does not let us down.

Tudor GMT Watch Wrist Shot

Replica Tudor Heritage Black Bay Shield Green Watch Made by Z Factory

Replica Tudor Black Bay Green Watch

I love green color in the summer, it looks so fresh and clean. The most popular watch that successfully uses green color is 116610LV Submariner of Rolex, this modelw was published a few years ago and it is still in hot need among a large amount of watch fans. Now the brand I am going to introduce is Tudor, which also loves to use different color on its bezel, Tudor has several models, each with different bezel color, like red, black and blue, especially the Tudor Red, it is a best seller. The replica watch here is made by well-known Z factory, which is good at making Tudor replica watches. The replica is in top quality, with a reliable Swiss ETA 2824 automatic movement, case construction, dial details and bracelet design are all in top imitation level. If you need a low-key Swiss luxury watch in a limit budget, then this replica Tudor will be your perfect choice.

ZF Replica Tudor Heritage Black Bay Green

The biggest feature of this Tudor replica watch lies in its green bezel, which is made of aluminum, not ceramic. This material has a high corrosion resistance and hardness, the bezel color has been adjusted to make it look exactly the same as genuine one. Case is 41mm in diameter, it is made of solid 316L stainless steel and brushed, case is not the bright spot, the bezel is. A lot of people buy this Tudor watch due to its attractive green bezel.

ZF Replica Tudor Black Bay Dial

Besides the bezel, the bracelet also looks in top quality. It is unique rivet bracelet made of 316L stainless steel. Like case, the whole bracelet is brushed, it not only has enough weight, but its texture feels top grade, the rivets decoration is so special. Deployant clasp has correct engravings and special Tudor Shield buckle. This Tudor Black Bay replica is made by a big factory but sold at a cheap price, it is worth your purchase.

ZF Tudor Black Bay Black Dial

The following comes more specification:

Movement: Swiss ETA 2824-2 Automatic, 28800bph
Case: 41mm*11mm, 316L Stainless Steel, Green Bezel
Crystal: Domed Sapphire with Colorless AR Coating
Dial: Black with Superlumed Hour Markers and Hands, Strong Green Lume in The Dark
Bracelet: Rivet Bracelet Made of 316L Stainless Steel
Water Resistant: 30m

ZF Replica Tudor Green Bezel

Tudor Rose Flower Crown

Tudor 316L Steel Case

Tudor Special Edition Case Back

Tudor Green Shield Buckle

Replica Tudor Green Wrist Shot

Z Factory Released Revolutionary MB & F Sherman Happy Robot Clock

Today, I want to show you something different and special, it is not a watch, it is a robot. The genuine MB & F Sherman Happy Robot Limited Edition Clock was released at SIHH 2016, this one shown here is an imitation from Z factory, the whole robot clock looks like a movement, actually it is a custom L’Epee tourbillon movement that is 17 jeweled. Once being wound by the key, the clock will have 8-day power reserve. The size of the robot clock is 143mm in height, it is 109mm width and 80mm thick. There will be a large wooden box to load the Happy Robot. The weight of this clock is 1kg.

Replica MB&F Happy Robot

MB&F Sherman Happy Robot Clock

MB&F Sherman Happy Robot Hands

MB&F Sherman Happy Robot Arm

MB&F Sherman Replica

MB&F Sherman Happy Robot Movement

MB&F Sherman Happy Robot Winding

MB&F Sherman Happy Robot Replica

Z Factory V2 Best Replica IWC Portuguese Watch with Blue Dial Clone 79350 Movement

Replica IWC Portuguese Chrono Watch

IWC Portuguese is a very famous watch and it is one of the best-selling dress watches in the world. In our watch market, there are three factories at least that are manufacturing IWC Portuguese watches, ZF, YL and 3A. Among them, ZF is the biggest and most famous one. Actually ZF makes the best quality replica IWC Portuguese watch, they are also the first factory that started to clone genuine IWC Caliber. Like this replica, ZF equipped a clone 79350 movement inside, this is a great improvement, because it is the first time for a factory to use a cloned IWC Caliber in a IWC Portuguese chrono replica watch, we only saw factories used such type of movements in IWC non-chrono Portuguese. The replica is a V2 edition, the V1 uses an Asian Valjoux 7750 movement, now the V2 uses a new clone 79350 like genuine IWC Caliber. This is the biggest difference, while there are certainly other improvement made on this latest version, let’s check it carefully in the following article.

Replica IWC Portuguese Watch Blue Dial

The case is 40mm in diameter and made of 316L stainless steel, round bezel is very thin, so we can see a very big dial under the sapphire crystal. Whole case is brushed, including four lugs. The face of bezel is also brushed while polished on edge. Like genuine, you can operate the two pushers to start or stop chronograph. Case back is locked by four screws, there are vertical brushing on the center. When open the case back, the inside has beautiful geneva stripes and correct engravings like genuine watch.

IWC Portuguese Chrono Steel Case

Dial is blue. There are two small dials at 6 and 12. The subdial at 6 o’clock is displaying small seconds, while the subdial at 12 o’clock is for 30-minute chronograph. The two small dials are sunken on the main blue dial, together with the beveled inner bezel, the whole dial shows a 3D visual effect. Besides, silver Arabic numeral hour markers are also three-dimensional.

IWC Portuguese Chrono Pushers

The replica is a real chronograph watch because its basic movement is a valjoux 7750 chronograph movement. The factory modified its movement plates and auto rotor to make it look closer to genuine IWC 79350 Caliber, and they did it. When you open the case back, you can not even tell the movement difference between the replica and genuine. So you can relax and do not worry to be spotted when wearing it among your friends.

IWC Portuguese Chrono Case Back

Black leather strap, plus black hand stitching, perfectly match the leisure style of the replica watch. The band is made of genuine alligator leather, it will be very durable. The leather band is fitted a deployant clasp, which is brushed and features “IWC” engraving. This IWC Portuguese is very necessary for men who need a watch to fit their business suits.

IWC Portuguese Chrono Deployant Clasp

New Arrival Z Factory Replica Breitling Avenger Titanium Watch – Black Bird Are Sailing The Sky

ZF Replica Breitling Avenger BlackBird Watch

In replica watch market, Breitling watches were sold very well about 3 or 4 years ago, people liked their Avenger and Navitimer watches at that time. Nowadays, few people want to choose Breitling as their first replica watch. Do you know why? In my opinion, there are two reasons, first, Breitling watches are a bit harder to replicate, especially Navitimer, its complited dial design is difficult for watch factory to make it close to genuine. Second, most factories are engaged in making Rolex, IWC and Panerai, few of them are willing to produce Breitling replica watches. So, these are two main reasons to explain why replica Breitling watches are not sold well. However, there is one Breitling watch that is still loved by many watch fans, it is Avenger BlackBird that we are going to discuss today. The replica watch is made by Z factory, it is the latest model in our market. I was attracted by its cool black outlook, from a big factory, the quality is superior, with a black nylon strap, it completely meets the theme of military watch.

Replica Breitling Blackbird Titanium Watch

The case is 44mm in diameter, it is made of Titanium, so the replica watch will feel very lightweight and comfortable to wear. Titanium case has black DLC coating plated, which makes the watch look tough. The bezel is anti-clockwise rotating, there is a lume pearl at 12 o’clock. Bezel markings are deeply engraved, the whole case and bezel are matt finished. About the crown, it is big and has square patterns on, so it is very convenient to rotate the crown to adjust time and date.

Replica Breitling Avenger BlackBird Black Dial

Upon experience of H factory, ZF improved the dial on this replica Breitling Avenger to ensure it looks 100% the same as original. The metal Breitling logo on the dial is three dimensional, central second hand has a red tip that has an obvious look on this black dial. Date window is easily to be found at 3 o’clock because it has a red frame and white font in black background. Check photos below and compared them with genuine watch, could you please tell me how close the dial is?

Replica Breitling Avenger BlackBird DLC Black

Black nylon strap perfectly matches DLC black case, each side of the band uses different material. The outside face is made of Nylon, while the inside uses black leather, such design on strap guarantees the greatest wearing comfort. Z factory also offers one pair of free camo leather straps for this replica watch. Here is the watch details:

Replica Breitling Blackbird Crown

Movement: Swiss ETA 2814-2 Automatic, 28800bph, 25 Jewels
Case: 44mm*13mm, DLC Plated Titanium, Uni-directional Rotating Bezel
Crystal: Sapphire with AR Coating
Dial: Black with Super Green Lume on Hour Markers and Hands
Bracelet: Black Nylon Clad Leather Band with Tang Buckle
Water Resistant: 50m

Replica Breitling Blackbird Titanium Case

Replica Breitling Avenger AR Coated Crystal

Breitling Logo on Nylon Band Buckle

Replica Breitling Avenger BlackBird Case Back

Replica Breitling Blackbird with Red Camo Band

ZF Super Clone Panerai Luminor Marina PAM 1351 Review

Replica Panerai Luminor Marina PAM 1351

Each year Panerai added new models to their Luminor and Radiomir collection, in the latest PAMs they have published in recent years, Panerai used more innovative materials like carbon fiber and bronze. While I do not like the way they use blue, green and other color on their dial, that’s the reason why I always love PAMs published in old times, because they inherited the classic features of Panerai and offer a variety of band options for watch fans who want to place the watch for fun. Panerai watches today look more modern and are equipped with more high-tech movement developed by Panerai itself, however, these new models are loosing some flavor that has been kept by Panerai for a lot years. Only some Luminor Submersible has this flavor that is the core spirit of this brand made for the Italian Navy. Today, I am going to introduce a new replica Panerai here, it is PAM 1351 made by Z factory, here we call it ZF. Yes, you notice its small blue hand on the left subdial, but I do not like it.

PAM 1351 Titanium

It is a PAM that features a see-through case back, yes, the biggest feature lies in its movement, which is a super clone P.9010. ZF makes the best P series clone movements because the rubies on movement plates are closest to genuine. The movement has all correct blue engravings on such as “OP LOGO”, “OFFICINE PANERAI”, etc. There screws on the center are fixing the auto rotor to the main place, this design makes the movement work more stable.

PAM 1351 Tabacco

The case material is high tech, it is Titanium, but I do not like its processing way, have you noticed the brushing on case and polishing on bezel, the watch will look more attractive if Panerai also uses brushing on the bezel. 44mm is acceptable for most people who love big watches in current watch trend.

PAM 1351 Tabacco Dial

Tabacco brown dial is eye-catching, as well as the blue second hand in small dial at 9 o’clock. To match the tabacco brown dial, the luminous material applied on the plate below the dial is in brown, not in patina like most other PAMs. The dial will give the wearer a strong green lume at night.

PAM 1351 Titanium Case

Besides the movement, the second place I love about this Panerai is its brown asso leather strap with pre-v buckle. If the band was in a darker brown like the dial color, I think the watch will become more attractive to you guys. Now, this is the end of the replica PAM 1351 review, please leave your opinion if you are interested in any of those.

PAM 1351 Case

PAM 1351 Asso Band

PAM 1351 Asso Leather Strap with Pre-V Buckle

PAM 1351 Super Clone P.9010